Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5

*Solved Minerva Tropic Master model w117 "early"-crackle pop & no vol ****SOLVED

I believe springy material on brake lines is to reduce vibration, lessens chance of a rub through. Older vehicles like my '69 Cobra Jet didn't use them, but my '72 Comet does have wrap on lines.

Tom

wiper to ground reads about 7 ohms this time, sometimes its 10, others is 2 and other times its like 20 but still low enough.

so... the ref gnd signal is stable enough to not be the fault for this.

it could be several things.

i tried calibrating down in resistivity of the 47kohm R after the wiper,, still have sound with vol at Min.

i think i will just live with it.

this bugger gets really HOT on the outside,,

headed out to put it back inside its carry case after i add my antenna relay back on.
i am considering a 120 v small fan to mount inside it....

new cooling fan in,,, now that really took care of the heat.


air intake is in the "back door"
air hits ceiling and goes left and right out the side louvers.


Attached Files Image(s)
       

i really want to add a couple things to this set

i want an S meter

i want a BFO even if its a gimick type.
i am getting a lot of side band in addtion to shortwave

i am going to start with the gimmick BFO type for side band if anyone has suggestions.

i know i will need another tuning cap which i have several.

from there i will need a knob on the tuning cap which i have.

i can string up and make a 0-100 scale which will be visible in the lower part of the main tuning window just below the words printed "tropic master".

how do i wire in such a thing?
do i attempt to copy cat the gimmick from my hallicrafters S38-d which actually works really great!.

any ideas or anyone experienced in doing this?

Hello friends, I loved seeing all the work in this rarity of 1944, I have a radio of this model here and I need to restore it, it is not as beautiful as this one on the topic, what was written in most components has worn out over time, I need to replace components mainly capacitors, I don't have his technical documentation, if any of your friends know of a site that I can download, please let me know, thank you very much !.

W-117 early version:

http://www.nostalgiaair.org/pagesbymodel...010877.pdf

W-117 late version:

http://www.nostalgiaair.org/pagesbymodel...010878.pdf

Better copies can be found here:

https://worldradiohistory.com/Archive-Ri...45-MNO.pdf

Good luck!

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread:
[-]
Recent Posts
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM
The list of my radio & TV collection!
Magical chords of forgotten melodies, old nostalgic music on an old radio... Saturday night blues on the Mid-Waves on an...RadioSvit — 12:20 PM
Philco 42-345 Restoration/Repair
Thank you MrFixr55 the issue with this radio is that the internal coil antenna is missing and there was a wire in its pl...osanders0311 — 11:34 AM
Philco 610B oscillator wiring
Regarding the oscillator circuit which is comprised of the 6A7's cathode, control grid, and screen grid. These elements ...Radioroslyn — 10:33 AM
Philco 42-345 Restoration/Repair
Hi OSanders, First off, welcome to the Philco Phorum where Phine Phamily-Phriendly Pholks Phull of Philco Phacts and P...MrFixr55 — 08:41 AM
Philco 42-345 Restoration/Repair
Today I've been reading through the site trying to learn more about this radio. I also soldered the lose power cord cabl...osanders0311 — 08:24 PM
Philco 610B oscillator wiring
Thanks David! I do have that same later prodution model 610 schematic. I've also studied the Philco service bulletins fo...Tubester — 08:12 PM
Philco 610B oscillator wiring
Some info from Beitmans says late production. David   David — 06:06 PM
Restoring Philco 96
Oh wow! Just found this thread.  Brings me back to early days on this phorum.  I did a 96 back in 2017.  Thread here: ...rfeenstra — 06:05 PM
Philco 610B oscillator wiring
Thanks for the replies. It's not the really the hum that I am after. Just trying to understand why only the shortwave ba...Tubester — 04:01 PM

[-]
Who's Online
There are currently 2292 online users. [Complete List]
» 2 Member(s) | 2290 Guest(s)
AvatarAvatar

>