Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1931 Westinghouse WR-10 Tombstone Radio
#1

Hello Everone, recently I was given a 1931 Westinghouse Model WR-10 Tombstone Radio which when I first got it that cabinet was shot but the guts were still good on it (the radio was found in an old abandoned farmhouse that the roof had collapsed on it 20 years ago and the radio had sat in that house all that time which is why the cabinet was basically rotted to the point that it was falling apart).

Anyways I had bought a new cabinet for it on ebay for $30 plus shipping and cleaned up the chassis and replaced some a couple of bad paper caps in the chassis and the original cloth cord as the cord had a break in it somewhere that caused it to not power on when it was plugged in with a brand new cloth cord (basically a modern rubber cord with a cloth sheathing around it), and plugged it in a turned it on, and sure enough the radio worked like brand new still even with its original dry electrolytic filter capacitors intact, and the radio is super sensitive, as I was able to some major DX'ing on it at night where I was picking up stations from all over the country including an oldies station from Ontario, Canada, and all I was using was a 30' length of zip-cord for the antenna that was stretched out across my basement and clear upto the kitchen upstairs.

I have some pictures of the unit in question posted below.

Sorry about the poor lighting in the pictures, my basement isn't very well lit.


Attached Files Image(s)
           




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
IF can wire size and Rubber mounts?
Thanks for the info but I doubt that a hardware store would be carrying the proper tuner assembly support mountings for ...georgetownjohn — 10:38 PM
12' Philco
Perhaps Kareem Abdul Jabbar?GarySP — 10:33 PM
My last cabinet for this year
Outstanding work, Dan! Take care and BE HEALTHY! GaryGarySP — 10:31 PM
My last cabinet for this year
They are a nice looking radio, Stromberg. I have a small tabletop octagon-dial one. It sounds surprisingly nice. And t...morzh — 09:40 PM
Philco 41-608 changer coupler
Different years but the same idea.morzh — 09:38 PM
My last cabinet for this year
That’s a beauty! :thumbup:klondike98 — 09:24 PM
Philco 41-608 changer coupler
Hi Morzh, I've searched using Mondial as the user name with various keywords such as 'coupler', 'motor', 'idler', 'p...alangard — 08:31 PM
Philco 16B Parts
I think the chassis is painted.morzh — 08:13 PM
Philco 38-2 Automatic Tuning
Honestrly, the original is quite acceptable and, it seems to me, can be cleaned.morzh — 08:11 PM
Philco 41-608 changer coupler
Mondial left a thread about remanufacturing thois type coupler.morzh — 08:09 PM

[-]
Who's Online
There are currently no members online.

>