Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Break in? Fact or fiction?
#1

Do newly wrapped coils 'break in' or 'season' with age? I know it's a loaded question, but curious of others experiences.
#2

From the electrical point of view this is a bunch of hooey.....all these break-ins, be it cables, coils.....

Over time your bobbin could absorb moisture and stop being a good bobbin. But this is degradation and not a break in.

A well-made inductance will change a little if not at all over time. Inductance is dictated by geometry only. If you designed it so that your geometry is stable, so will be your inductor.
And even then......moisture is your main enemy. It is conductive and counters the inductance by the eddy currents appearing in the moisture mixed with chemicals.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

The basic answer?

No. There is no breakin period.

If you wrap a coil for "x" mh and you have done your job correctly, it will stay at that value until you change something about it.
#4

I can imagine very small effects.. A change in Q factor or self capacitance might result through the drying of varnish or laquer. Whether this would be noticable in anything but the most sensitive tests and applications, I doubt very much.

I don't hold with furniture that talks.




Users browsing this thread:
[-]
Recent Posts
12' Philco
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM
Hickok AC51 tube tester
I think they have only shown the secondaries of the transformer. Two of them feed the rectifiers' filaments.morzh — 12:58 PM
IF can wire size and Rubber mounts?
Arran If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM
12' Philco
Rod, Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently. H...morzh — 12:54 PM
Hickok AC51 tube tester
Absolutely no one is going to reverse engineer that circuit. Even the iron core is missing.RodB — 10:37 AM
IF can wire size and Rubber mounts?
Thanks to both members for your help regarding wire and tuner mtg supports. regards--Johngeorgetownjohn — 09:33 AM
Hickok AC51 tube tester
Note that no power cord, power switch, or power transformer switch are shown. That (along with my experience with full s...DaleHCook — 07:09 AM
IF can wire size and Rubber mounts?
A pair of wire strippers can give you an idea of what the existing gauge of the wire leads are in the IF can, I think it...Arran — 06:07 AM
My last cabinet for this year
Hello Dan, That is really beautiful what great looking radio you have ! I have friends who live in Calgary and the wea...radiorich — 01:51 AM
Philco Predicta Siesta picture over time getting dimmer
I found that the wire insulation was burnt.  The fly back needs corona dope! Why would someone put that there?Platinumblonde36 — 01:09 AM

[-]
Who's Online
There are currently 5316 online users. [Complete List]
» 1 Member(s) | 5315 Guest(s)
Avatar

>