|
37-610 dial removal
03-16-2021, 12:52 PM
Hi guy's
Have a Philco 37-610 table radio with the round dial and escutchion. Can anyone tell me how the round dial and glass is removed? Want to refinish it. Thanks, murf
03-16-2021, 01:02 PM
Press the brown ring w/the palm of your hand. Give it a twist to the left and it should pop off. Glass will fall out. Or maybe it's the right, you'll figure it out. OBTW on most of the '37 model the front panels are photofinish (big decal) and if you strip them you'll be stuck with a very light not so stainable wood underneath.
When my pals were reading comic books I was down in the basement in my dad's workshop. Perusing his Sam's Photofoacts Vol 1-50 admiring the old set and trying to figure out what all those squiggly meant. Circa 1966 Now I think I've got! Terry
03-16-2021, 01:24 PM
Hi Terry,
Thanks for the info. I know its photo finish, but it is scratched up pretty good. Wonder if anyone sells sheets of photo finish material? Could apply a sheet of veneer I suppose Have recapped it and it plays strong. Kevin 
03-16-2021, 01:57 PM
murf, take a look at the photofinish section of the main site here. It has information on how to deal with the problem...
https://www.philcoradio.com/schooley/
03-16-2021, 02:54 PM
Hey Kevin,
Along with what Mike posted have a look here: https://www.philcoradio.com/phorum/showt...?tid=22277 The tricky part is doing the stripes and making them level with the finish. Both doing the veneer and or painting to recreate is tedious. I've never done the veneer/inlay to recreate but have painted using several colors to achieve the proper look (or close to it). Did leather repair for abt 30 yrs and coloring process is similar. >but it is scratched up pretty good Sounds like an oxymoron. Is really good to be scratched up?? I digress. If it's not too bad to you have a lot of time to kill this is what I did on a small cabinet. It will get you the basic steps to color and level it. https://www.philcoradio.com/phorum/showt...?tid=18546 There was a company called "Re-faux Pro" or something like that. They have gone for a number of yrs now. Product was marginal and price was high. So you weren't missing out on anything. When my pals were reading comic books I was down in the basement in my dad's workshop. Perusing his Sam's Photofoacts Vol 1-50 admiring the old set and trying to figure out what all those squiggly meant. Circa 1966 Now I think I've got! Terry
03-16-2021, 09:03 PM
Have some veneer, so going that route.
Got the radio for free and really don't care if it is not the original phoney finish. Mine will probably look better anyway. Murf .
03-16-2021, 10:56 PM
Kewl...
When my pals were reading comic books I was down in the basement in my dad's workshop. Perusing his Sam's Photofoacts Vol 1-50 admiring the old set and trying to figure out what all those squiggly meant. Circa 1966 Now I think I've got! Terry
03-17-2021, 12:58 AM
Given what they supposedly charged fro the decals it would be cheaper to redo the front with real veneers. It looks like the decals on the 37-602 were intended to mimic olive burl, and Zebra wood, veneers.
Regards Arran 
03-17-2021, 07:57 PM
Is this what your model looks like?
37-610 Mine was not photo finish. The lacquer was heavily scratched. Have any pictures of yours. If anything I’m curious. Tony “People may not remember how fast you did a job, but they will remember how well you did it”
03-18-2021, 11:47 AM
Mine is a tombstone.
I have put new veneer on the front. Now to refinish the whole cabinet. I can post a pic when its done. murf
03-18-2021, 01:40 PM
Gezzz I thought the guy on the alka seltzer commercial was speedy!!
When my pals were reading comic books I was down in the basement in my dad's workshop. Perusing his Sam's Photofoacts Vol 1-50 admiring the old set and trying to figure out what all those squiggly meant. Circa 1966 Now I think I've got! Terry
« Next Oldest | Next Newest »
Users browsing this thread: |
|
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
