Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Philco ford console
#1

I was curious if anyone could confirm this was a 1974 console and what the value/additional info on this model please? 

My neighbour mentioned winning this in a raffle in 1974 in victoria, bc. The console, record player & speakers still work.
Thank you


Attached Files Image(s)
           
#2

Solid state, as I suspected. It says so.

I doubt it has high value.
You probably would benefit keeping it, as, after all, it is somewhat of an antique, as it is 70-s for sure, or selling it to someone who really wants to relive 70s.


I am sure there will be people willing to part with $50 - $100 to have it.
In which case (it looks clean) you'd be better off not trying to restore it as, personally speaking, unless I know the person who did the restoration, I automatically presume it is inadequate. And, unfortunately, I have rarely been wrong in that assumption, even when I bought pieces from vendors in Kutztown who, supposedly, knew what they were doing. And so will think many a prospective buyer.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Like most of that sort of thing it's probably worth whatever someone wants to offer for it, I would not say it's worth having someone restore it for resale. Philco was not exactly a high end brand by that time, likely has a standard four speed VM or BSR changer like the coffin stereos did. 
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
Ok guys. Thanks for the input. As for AI this is why I ask the experts. Dandconant — 07:39 AM
Philco 71 Code 125
Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM
54C Cabinet Refinish
hello Roy, I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM
Philco 71 Code 125
This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM
Philco 71 Code 125
Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM
54C Cabinet Refinish
Roy; Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM

[-]
Who's Online
There are currently no members online.

>