Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

650X Logo Decal
#1

Does anyone know of a good source for the Philco Logo Decal on a 1936 650X radio?  Radio Daze has them but they are selling 8 at a time and charging $6+ shipping for something that could be put in a 1st class letter.

I really only need 1.  Is it possible to potentially print something out out with a color printer and use that?

Thanks, Bill
#2

Bill;
Is there anything else that you may need, the last time I bought decals from Radio Daze (or was it a dial?) it was with a bunch of other stuff like capacitors, wire, etc. I don't know who else sells decals. Maybe someone on here can supply you with one off of a sheet?
Regards
Arran
#3

Unfortunately at this time, I do not need anything else. I found one on eBay for somewhat cheaper. ($7 vs. the $16 Radio Daze cost). Still kind of expensive for a simple decal.
#4

I'm sure I have what you need. I restored my 650X several years ago and can check my stash of decals for the Philco decal.

15 minutes later:

Yes, I have them. I have 3 sizes, so I checked to make sure I have the size you need. It's right below the dial on the cabinet. Send me a PM with your address and I'll mail it today.
#5

Here is a picture of the original.


   
#6

That's the one I matched. It's on the way.




Users browsing this thread:
[-]
Recent Posts
Philco 71 Code 125
Ok guys. Thanks for the input. As for AI this is why I ask the experts. Dandconant — 07:39 AM
Philco 71 Code 125
Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM
54C Cabinet Refinish
hello Roy, I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM
Philco 71 Code 125
This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM
Philco 71 Code 125
Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM
54C Cabinet Refinish
Roy; Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM

[-]
Who's Online
There are currently no members online.

>