Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

RCA T8-14
#1

Just got a "parts" T8-14 from an ARF deal, and was able to combine the speaker and a couple of tubes from it with my own T8-14 to produce a great looking and especially sounding set. This is an 8 tube, single 6F6 output/6F5 driver, 5Z3 rectifier 4.5 watt max output set. Additionally, I discovered that my set had an 80 where the 5Z3 belongs, so the "donor" 5Z3 was especially welcome.
#2

A T8-14 was one of my first radio finds and still have it. Nice sounding and good looking set that I learned alot of the basics on. Does your set have the globe tuning knob still? Also curious if there are any knob labels on the cabinet other than the RCA Victor logo.... mine are either worn away or never had em and the logo is pretty faded. Otherwise it's a nice original survivor.

- Mike
#3

Hello, Mike: both cabinets only had the RCA logo on them, nothing else. Fortunately, both sets had the complete set of knobs including the "globe" knob. I just commented on your collection and especially the RCA sets. Pretty neat collection you have!!
The reception of my T814 is super. It is funny that these sets do not seem to be very popular on eBay and other radio sites.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently 3985 online users. [Complete List]
» 2 Member(s) | 3983 Guest(s)
AvatarAvatar

>