Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Can anyone identify this set?
#1

Hi to all,
I'm usually a Philco guy, but, I found this little "mystery" radio at a yard sale in my neighborhood for $20. I could use some help identifying it!
There is a small plaque on the bottom of the front which says "MINUETTE" and when cleaning the chassis, i came across a label that says "MFG. by Gilfillan Bros." but no model number anywhere. It appears to be a TRF set, has five tubes- 3-24A, 1-45 and a 80. Has anyone ever seen one of these Icon_crazy !
Thanks!
Kevin
#2

That's a really cool west coast made radio that has designs similar to both Jackson Bell and Falck (Advance) sets. Gilfillan held the RCA license agreements so sets in the Los Angeles area had to either pass through, or eventually be assembled in their plant.

I haven't been able to determine if your set was actually a model sold by Gilfillan, or some smaller company that used Gilfillan to get the license agreements, but I'll continue to search.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

Nice find!!!
Looks likes it might be a model 100,105,or 106.
Good luck/with it
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#4

I've looked through my documentation and my set of Floyd Paul's Los Angeles Radio Manufacturing books but did not see a picture of your set of the mention of a Minuette. The styling is definitely west coast and that is verified by the Gilfillan label.

The midget or mantel set originated in the Los Angeles area and yours is a nice example of one not commonly found.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#5

I don't know how "West Coast" that cabinet design could be considered to be, there were several East Coast and Mid West manufacturers that built similar peaked top tombstones. Some of the first of the cathedral or "Midget Sets" sets to hit the market were put out by Echophone but the design of the cabinet with the off set dial and controls reminds me of a "Clarion" built by the American Transformer Company. Given the name "Minuette" on the dial escutcheon my guess is that it was some sort of private label store brand radio built by Gilfillan.
Regards
Arran
#6

Thanks all for the input! I've done a little detective work on Nostalgia Air's website. So far the closest thing I've found schematic wise is for a Jackson Bell Junior 50. the schematic shows the same tube complement as my mystery set- 3-24A's a 45 and an 80. I have to check the circuit diagram against the set to see if it's close. A search for Jackson Bell Junior 50 took me to a radio museum webpage but alas! No pictures Icon_thumbdown Kind of frustrating, but I guess that's what makes it fun!
Kevin
#7

Arran Wrote:I don't know how "West Coast" that cabinet design could be considered to be, there were several East Coast and Mid West manufacturers that built similar peaked top tombstones...........
Similar, but west coast sets often have a certain look. After chasing these for many years and pouring over Western Music and Radio Trade Journal's (the west coast equivalent of Radio Retailing), you get a feel for how the sets were styled. It isn't just an offset dial or a peaked top, but a combination of styles and designs that often set them apart.

While the Echophone model C was one of the earlier mantel sets, Echophone soon relocated to Illinois and their distinctive designs with repwood grills, starting with the S-5 series set them apart. I never felt that Clarion radios had the west coast look, even the offset dial models, and I've had several.

The Minuette in question has design features that were common to other sets that came from the Los Angeles area. The two that strike me the most is a modern Jackson Bell sunburst (either the model 60 or 62) and a Falck made by Advance. If I had seen this radio at a swap meet I would have guessed its roots even before seeing the Gilfillan tag on the chassis.

That's just my opinion and you are certainly entitled to yours.

[Image: http://img.photobucket.com/albums/v348/j...Bell60.jpg]

Good luck finding a schematic Kevin. I'll look in some of the material I downloaded from Floyd Paul and see if I find anything.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM
Philco 38-7 Speaker
FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM
Philco 38-7 Speaker
Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM

[-]
Who's Online
There are currently no members online.

>