Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
Well, I already know my set has weak tubes, in fact one is very weak. Anyhow I used to purchase my tubes from a gent in Ohio (Bill or Bob?), Pick-a-Tube I believe. Heck it's been awhile. Anyhow suggestions on were to purchase them?
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Bob Dobush at Find A Tube.
http://www.findatube.com/
Whenever I need tubes, I usually contact Bob first...great prices, great service, no complaints. A good guy to deal with.
Jim Cross at Vacuum Tubes, Inc. (who used to live in Ohio) is another honest seller.
http://www.vacuumtubesinc.com/
When it comes to tubes, the Ohioans are the good guys...not that the others are bad, only that I've had personal experience buying from both and can recommend either one.
--
Ron Ramirez
Ferdinand IN
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
Bob would be the guy, thanks Ron.
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Comrade, the Russians now make 2A3 for your fine American radio.
http://www.tubedepot.com/so-2a3.html
I think there is a Chinese version as well. Available at K-mart, Martha Stewart brand I think.
But, I would look for a used American one (6A3).
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
The same seller also has Sovtek 6A3 tubes. Sold as a matched pair only, $129.95 for the pair.
http://tubedepot.com/so-6a3.html
Don't forget your Tube Cube for your nice, new, expensive Sovtek tubes.
...or, buy two 6A3 tubes from Findatube.com for $28.00 each NOS, or $18.00 each used.
Hmmm...new Sovtek for $129.95 or NOS from Bob for $56.00?
Ask Charlie what he thinks about this choice:
http://www.youtube.com/watch?feature=end...FKfQN5Y7Ds
--
Ron Ramirez
Ferdinand IN
Posts: 7,285
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Wow!
Bob does have some very good prices on both new and used. Never have bought tubes from him but he is a good source for Sam's folders. Have gotten some TV folders from him over the years. Good guy and fast service.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Picture of Bob watching aliens land starship in his back yard:
[attachment=0]
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
LOL.... I met Bob about 5/6 years ago at an on-site auction. Naturally plenty of tubes to be auctioned for everyone... Nice guy I did see the Russian versions. But I cannot bring myself to stuff those in one of my fine American made Philco's (or any American radio for that matter). If that's all there was or the American made versions hit $250 a tube, I'll consider it.
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 7,285
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
From what I've heard from some of my ham buddies the Russian tube are ok but the Chinese jobs are not very good. I'd stay away from them. Agree with Ron a good pair of used US tubes is your best and cheaper way to go. The reliability will the best.
GL and hold on to your wallet.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
I have used Bob several times and he is great to deal with. His prices for 6A3s, 6L6s, and 6B4s are better than what you will find on eBay. Plus his tube for sale listing is huge.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco 46-420 Code 121 Reception issues
|
Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
Philco 46-420 Code 121 Reception issues
|
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
Philco 42-1008 conversion kit
|
Interesting. I haven't seen that before.klondike98 — 07:02 PM |
12' Philco
|
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
Shadow Meter Bulb
|
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
Shadow Meter Bulb
|
Ok. Thanks for the correction.RossH — 03:09 PM |
Model 28L
|
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM |
37-60 revision 6
|
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM |
Shadow Meter Bulb
|
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM |
Hickok AC51 tube tester
|
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM |
Who's Online
|
There are currently no members online. |
|
|