bakelite plugs of radio Philco 60, 84, 620, 610 ......????
Posts: 20
Threads: 11
Joined: Apr 2006
one questions, each model of radio philco has a different bakelite plug ???????
o all philco radio have the same model ?
can you send to me page o pictures of bakelite plugs of model ??
thank you, Mauricio
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Are you referring to the bakelite speaker plugs, or what? Please feel free to elaborate.
--
Ron Ramirez
Ferdinand IN
Posts: 20
Threads: 11
Joined: Apr 2006
hello again, not the plugs of speaker, i look for the model of plugs of finish of cable of the radio philco annes 30
Philco 60, 610, 620, 84, .....
my email is mauricioarancon@hotmail.com
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Hi Mauricio
Do you mean the AC plug at the end of the power cord?
Note from site admin: Sorry, but the photo which was attached to this post is no longer available.
(Still getting used to a digital camera, so yes, this image is a bit blurry.)
I've deleted all of the duplicate topics on this subject, also. Please, let's confine this discussion to this topic to avoid confusion, okay?
--
Ron Ramirez
Ferdinand IN
Posts: 20
Threads: 11
Joined: Apr 2006
Thank you Rom, one questions,
all bakelite plugs the philco radio annes 30 are same model ?
in the pictutes there are 3 bakelite plugs, are all the same model ? because the plugs of the left have not the drawing
sorry my ingles is bad, thank you Rom
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
The plug on the left differs slightly in style from the others, but this is the basic design of AC plugs as used on nearly all vintage radios, lamps, and other household appliances of the late 1920s through most of the 1930s.
Hard to pull out of the wall socket...not exactly the safest things ever made. Modern replacements are safer to use:
http://www.radiodaze.com/power.htm
--
Ron Ramirez
Ferdinand IN
Posts: 20
Threads: 11
Joined: Apr 2006
i have much bakelite plugs of radio of this, but i look for the model of philco exact, because i colector of radio, and i want that my radios has all pieces origianal , incluse the plugs
i have some squematic but in this paper put L-943a, but i have not pictures.
do you know which is the model exasct the radios philco annes 30 ? 620, 60, 37-84 etc
thank you, Maruicio
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I've seen both kinds, and other very similar styles, not only on the 1930s Philcos, but on other vintage radio models.
I wouldn't be concerned about the exact AC plug, since they do seem to vary on surviving sets. But to each his own...
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Shadow Meter Bulb
|
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
Shadow Meter Bulb
|
Ok. Thanks for the correction.RossH — 03:09 PM |
Model 28L
|
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM |
37-60 revision 6
|
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM |
Shadow Meter Bulb
|
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM |
Hickok AC51 tube tester
|
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM |
Model 28L
|
Hello,
I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020.
Can...HORSTE — 10:32 AM |
Philco 42-1008 conversion kit
|
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit. That would rem...alangard — 09:30 PM |
HiFi (Chifi) tube amp build - but my own design.
|
Tim
Well...a chassis is metal. Magnetic or not, it does not matter.
A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM |
Hickok AC51 tube tester
|
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM |
Who's Online
|
There are currently 3110 online users. [Complete List] » 1 Member(s) | 3109 Guest(s)
|
|
|
|