Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Model TH-1 Investigation solved!!!
#1

Last May while in Kutztown I scored another rare radio that looked suspiciously like a Philco. Since I knew that Philco bought Simplex in the late 30's I decided to buy it. (the fact it was only $10 helped) I was to find out later that this little guy was a true missing link. I decided to dig it out of my "awaiting attention area" to do some research for an upcoming presentation on clone radios for my radio club (Delaware Valley Historic Radio Club) near Philly. Of course Ron's site answered all my questions but it still left a somewhat rhetorical question, "Was the TH-1 a Simplex designed set. I present exhibit "A", a radio that is the exact match to a TH-1 with a Simplex dial.


Attached Files Image(s)
       
#2

Icon_thumbup
#3

I don't think it was exactly a mystery that the first household Transitone set was a Simplex designed and built radio, Ron's book explains this, if the dial didn't tell the story the chassis and circuit used would have, Philco did not have any other model in their lineup that had a TRF circuit at that point in time. If you take the example of RCA buying out Victor in 1928, and then allowing the Microsynchronous sets to go into production for 1929-30 then it makes perfect sense. Nine times out of ten a manufacturer will engineer, design, and tool up to produce a new product at least six months in advance, in the case of cars the process starts up to five years in advance, mergers can happen at the drop of a hat, maybe a couple of weeks, so it would be very expensive and foolish to cancel a new product on that basis. You may also notice that the Simplex uses a Philco style "V" patterned grillecloth so either they got that from Philco and continued producing and marketing sets under their own name as well as the Transitone name after the merger, or they used the same supplier.
Regards
Arran
#4

Quoting from Ron's description : "Could this be Simplex Radio Company (referring to the S.R.C. on the tag) and was this the TH-1 a Simplex-designed set? This possibility remains under investigation" Reading this we understand that Ron knows the answer but does not have conclusive evidence to back it up. This radio proves his theory. This is also why I added that it was a somewhat rhetorical question but thanx for your concern....
#5

There you go. This is the "smoking gun" I needed to prove my theory, but did not have until now.

Thank you, PhillyPhilco, for your post and the pictures. I'll contact you later about those pictures, but I'm quite busy at present. I'd like to add some more info to my website including your photos.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently 1524 online users. [Complete List]
» 2 Member(s) | 1522 Guest(s)
AvatarAvatar

>