Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My 60L before and after.
#1

My Philco 60L returned home tonight. I had it given to me a while back and gave it to a friend for a while. Well, he decided to give it back to me and he started work on it before I got the whammy electric bill and work cut me to two days this week. Anyways, I mostly traded for the repairs which included recapping the unit, replacing the grill cloth with a presentable one off a 50's console that was junked out, finding a usable speaker, rewinding two of the coils, and replacing the knobs and the number 75 tube which decided to die right after the radio was repaired. Also the missing escutcheon was found jammed in front of the chassis.

Here is before:

   

And now:

   

No matter where you go, there you are.
#2

I swapped out the 60L with the Atwater-Kent in my bedroom this morning. Definitely a better little console more suited to the smaller room. Performs quite well for a five tube radio.

No matter where you go, there you are.
#3

The little 60 is a pretty good player. I've got one in a BG cabinet and a 66 in a moderne cabinet. The 60 as been working years and years. The 66 the cabinet is a mess and haven't had a chance to have a look at chassis. The 60 and 66 are kinda same but the 66 has much better SW coverage.
Terry
#4

I should try and track donw a 60 Baby Grand to go with my console now! Icon_biggrin Once I get some money back ahead. I'll have to look up the 66 and see what it looks like. I know I've been playing the heck out of my 60L since I got it home last night and am tracking down some spare tubes out of my stash just in case one decides it has had enough. Icon_smile

No matter where you go, there you are.
#5

Very nice Icon_thumbup I noticed your escutcheon and knobs are a different (earlier?) style than mine. Your cabinet looks to have higher quality veneer too.

[Image: http://farm4.staticflickr.com/3104/57171...13e9_z.jpg]
#6

Really neat, Jayce! Icon_thumbup

Bob, the 60L remained in production through the 1935 season, so since yours has the bakelite escutcheon and hex knobs, it was produced during the '35 season but after the switch from a brass escutcheon to bakelite. And it's the small escutcheon, so it was probably produced sometime between the summer of '34 and the end of December '34.

--
Ron Ramirez
Ferdinand IN
#7

The friend who repaired mine said he saw a stamp on the chassis or original speaker that said '1934'. If that is true mine was probably produced early that year. It's just nice to have it back together again and I do still have the original speaker with hopes of having it reconed someday. It was ripped to shreds.

No matter where you go, there you are.
#8

I posted the before and after pictures of this radio on my Facebook page and today I have had coworkers stop me to compliment the radio and my friend's work on it. The 60L has become my daily driver console in my bedroom. The entire family here in the house seems to really like it. Icon_smile

No matter where you go, there you are.
#9

It is always super when they turn out swell, enjoy it. Hope it brightens things up for the rest of the winter.

Paul

Tubetalk1




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM

[-]
Who's Online
There are currently 1246 online users. [Complete List]
» 2 Member(s) | 1244 Guest(s)
AvatarAvatar

>