Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I've got a 610! Schematic?
#1

Hi Pholks!

I'm brand new to the Phorum, and brand new to radios. I have been building tube guitar and some hi-fi amps for a few years.

I'm here because a friend gave me her Philco, a 610 as I just discovered (see pic), and I'm looking to do a bit of restoration. From the photos, you'll see that it's in pretty good shape, and that someone has done a partial recap at some point. I brought it up on the variac w/ light bulb limiter, and it works! I was able to tune in several AM stations.

I've been soaking up some info here, so I have some idea what I'm in for, rebuilding bakelite blocks and such. Alignment sounds scary, but I'll burn that bridge when I come to it. The question I have at the moment is, do I have the right schematic. This is the closest I've found. It almost matches my tube complement. I've got a 41 output tube, it shows a 42. Would that be a common production variation? Or maybe whoever worked on it before changed tube types? Any clues much appreciated.

I'm excited! My first old radio! Until a few days ago I couldn't have told you what a field coil was. What? There weren't always permanent magnets?? Icon_biggrin

John

[Image: http://grandpaslab.com/wp-content/upload..._front.jpg][Image: http://grandpaslab.com/wp-content/upload...430910.jpg][Image: http://grandpaslab.com/wp-content/upload...03/016.jpg]
[Image: http://grandpaslab.com/wp-content/upload...490200.jpg][Image: http://grandpaslab.com/wp-content/upload...03/015.jpg]
#2

Hi and welcome!

Yes, you have a 610B, and yes, the schematic you have is a 610 schematic.

The 610 underwent numerous circuit changes during production. In order to have all of these, I suggest you order the service pack for this set from Chuck - well worth the $7 cost.

http://www.philcorepairbench.com/

A 41 will substitute for a 42 in a pinch, but it's best to use the proper 42 tube. The characteristics of the two are not exactly alike, plus the 41 has lower output power.

--
Ron Ramirez
Ferdinand IN
#3

Thanks, Ron. I've placed my order with Chuck, and found what looks to be a good 42 for a reasonable price on eBay.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 code 221
Dirty tube pins and socket, cold solder joint, stray tiny strand of wire, clean the entire area around the oscillator tu...RodB — 08:43 PM
Philco 91 code 221
I have been restoring one of these sets and switched it on yesterday. It didn't exactly spring into life, but after a co...Philconut — 08:26 PM
Philco 50-925 antenna connections
That's super. Glad to hear you figured it out. Paul.Paul Philco322 — 11:11 AM
Philco 50-925 antenna connections
Hello Keith, great news !! Sincerely Richardradiorich — 02:14 AM
Philco 50-925 antenna connections
Finally, got the antenna fixed (repaired some broken wires) and have the radio playing. I've got four different schemat...keith49vj3 — 09:38 PM
1949 Motorola 5A9M
Bob, Nice radio.  I’ve not seen one before.  Keep us updated!Joe Rossi — 07:56 PM
Phioco 90 Power Transformer Wire Colors
Thanks for adding that information.klondike98 — 06:09 PM
Phioco 90 Power Transformer Wire Colors
Although I have used this site as a resource for a number of years this is my first post.   I am restoring a Model 90 si...vincer — 05:02 PM
My collection presentation
There is a complete instruction how to solve your problem. One piece of advice - be careful with the low-voltage capacit...Vlad95 — 09:32 AM
My collection presentation
Vlad; I thought your brown RCA portable looked familiar, I have one that is very similar, the RCA-Victor model BX-55....Arran — 02:31 AM

[-]
Who's Online
There are currently 735 online users. [Complete List]
» 2 Member(s) | 733 Guest(s)
AvatarAvatar

>