The Philco Radio Story on Video
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
This video, featuring a silent film from 1929 shot in the Philco factory at Ontario and C Streets in Philadelphia was available for several years on VHS tape. I think that it was on DVD at least briefly. It appears the company which produced the video, Encore Home Entertainment, has gone out of business as I can no longer find a website for them. Encore is still around and still selling the video - see post #14 below.
Anyway, Codefox brought it to my attention that the video is now available on YouTube. The resolution is not great, but viewable.
You can watch it here, or click the YouTube logo in this thumbnail to watch it on the YouTube site:
[Video: https://www.youtube.com/watch?v=kanPsUDyKrU]
--
Ron Ramirez
Ferdinand IN
Posts: 2,023
Threads: 365
Joined: Jun 2010
City: Dover, OH
Hmm, another reason for me to hope we will be finally able to get DSL next week!
No matter where you go, there you are.
Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
So Ron, Is that a model 87 they're putting together??? Didn't see any holes for the grid leads in the coil shields.
Terry
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I think there may be a similar silent film showing a tour of the old Rogers-Majestic plant in Toronto, but I have never seen any more of it then some footage of the outside of the plant and Ted Rogers in his office. I've heard of the Philco factory tour, and have seen ones put out by RCA, I think there may also be one of the Atwater Kent plant in Philadelphia as well.
Regards
Arran
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Hi Ron
That was really interesting, thanks for posting I really enjoyed it ![Icon_thumbup Icon_thumbup](https://philcoradio.com/phorum/images/smilies/icon_thumbup.gif)
Joe
Joe Bratcher near Louisville, KY
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Interesting video! I don't have an 87, but I have (I know I said I wasn't buying anymore ![Icon_redface Icon_redface](https://philcoradio.com/phorum/images/smilies/icon_redface.gif) ) model 65 in that cabinet. Hey, it was only $20, so how could I turn it down?
Gene
(This post was last modified: 03-10-2013, 09:13 AM by Gene Pederson.)
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
I've got an 87 and a 95 with that cabinet too.
Terry
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Nice video and I'm looking for a 95 highboy. Seem either hard to find or very expensive.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Neat!
Posts: 40
Threads: 5
Joined: Apr 2008
Ron, Loved the video. Much better than expected. Thanks again.
Dave D
Posts: 1,400
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
How things have changed, OSHA would have a hayday in that factory! The total lack of machine guarding and the guy spraying lacquer with no respirator.
Steve
M R Radios C M Tubes
Posts: 52
Threads: 1
Joined: Mar 2013
City: Minneapolis, MN
Thanks. It impresses everybody.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Hold the phone, folks. Encore Home Video is still around and still selling the PHILCO video on DVD:
http://encorehomevideo.com/radio/philco.html
--
Ron Ramirez
Ferdinand IN
Users browsing this thread:
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
40-150 General questions
|
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM |
40-150 General questions
|
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM |
Who's Online
|
There are currently 3596 online users. [Complete List] » 3 Member(s) | 3593 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|