40-150 finished-- almost!
Posts: 299
Threads: 107
Joined: Mar 2011
City: Sheboygan Falls,Wisconsin
Hey everyone,
Here are a couple of pics of my mostly finished 40-150! I still have to figure out how to make preset tabs. This set plays nicely, but the cabinet fought me. I thought that being a simple design, it would be an easy one to restore, but nothing went the way I wanted it to! I had it almost finished and decided that it was too dark so I stripped off all the new laquer and started over. I'm still not 100% satisfied but I don't want to do it over again!!!
[Image: http://i1160.photobucket.com/albums/q500...66d6c3.jpg]
[Image: http://i1160.photobucket.com/albums/q500...fb80ef.jpg]
Posts: 1,531
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
Very nice! I have a 40-180 console, which uses the same chassis.
Greg V.
West Bend, WI
Member WARCI.org
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
I think it looks real nice! 
Gene
Posts: 438
Threads: 15
Joined: Jul 2008
City: Anacortes, WA
Nice! I have a 40-190 that uses a similar chassis (well, an identical one, given that I have a 40-180 in it at the moment) and more importantly, the same escutcheon. I have a Word file and an Excel file that has the call letter tabs built with the correct font, if you're interested. I simply laminated the paper with transparent box tape (gloss finish) and, after some careful measuring (the tabs in the file weren't quite to size--didn't want white peeking through the margin) and work with an X-Acto knife, voila!
Drop me a line if you'd like me to mail you the files. 
Posts: 347
Threads: 34
Joined: May 2007
City: Raleigh, NC
I've always thought that radio was one of the most attractive Philcos. Yours looks brand-new, an outstanding restoration.
I have one that I've restored electrically, but have not done anything with the cabinet but clean it up and put some wax on it. It's in pretty good vintage condition, but nothing as lovely as your restored cabinet. Maybe your pic will inspire me.
I've never quite understood how the station labels go in that 1940 escutcheon, either. Mine were just glued in by a previous owner, unlike the plastic 1941 escutcheons that had slots for the station identifiers and their little plastic covers.
John Honeycutt
Posts: 438
Threads: 15
Joined: Jul 2008
City: Anacortes, WA
They're friction fit, which means there's a certain amount of precision measuring and cutting with the hobby knife. Took me a couple of tries to get the sizing right and, alas, I did not document the correct dimensions.
Posts: 47
Threads: 8
Joined: Apr 2013
City: Grand Marais, MN 55604
Very Nice! I have a 40-155 waiting in line....what did you use for paint on the faceplate? I have seen a couple suggestions but some not available in the US. What have you found? Again nice looking radio!
Jeff
Posts: 234
Threads: 43
Joined: Mar 2008
City: Mission Viejo, CA
Nice job. I've also gotten some darker than I would have liked, but they look good in a sunny area.
Posts: 299
Threads: 107
Joined: Mar 2011
City: Sheboygan Falls,Wisconsin
For the faceplate I tried a bunch of different paints, most of which I didn't like! I finally found this one. It's made by Rustoleum and it's called "Gold Rush Metallic" the number is 7270. I found it at my local Home Depot.
Kevin
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Looks nice!
--
Ron Ramirez
Ferdinand IN
Posts: 2,134
Threads: 158
Joined: Jan 2013
City: Westland, MI
Looks great! I will be tickled if my model 20 ends up looking that good. Take care. Gary 
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Posts: 47
Threads: 8
Joined: Apr 2013
City: Grand Marais, MN 55604
I was going to inquire as to the paint on the faceplate for my 40-155 but I see it in the thread! Nice work...looks great.
Jeff
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Philco 42-345 Restoration/Repair
|
| Today I've been reading through the site trying to learn more about this radio. I also soldered the lose power cord cabl...osanders0311 — 08:24 PM |
|
Philco 610B oscillator wiring
|
| Thanks David! I do have that same later prodution model 610 schematic. I've also studied the Philco service bulletins fo...Tubester — 08:12 PM |
|
Philco 610B oscillator wiring
|
| Some info from Beitmans says late production. David David — 06:06 PM |
|
Restoring Philco 96
|
| Oh wow! Just found this thread. Brings me back to early days on this phorum. I did a 96 back in 2017. Thread here:
...rfeenstra — 06:05 PM |
|
Philco 610B oscillator wiring
|
| Thanks for the replies. It's not the really the hum that I am after. Just trying to understand why only the shortwave ba...Tubester — 04:01 PM |
|
Restoring Philco 96
|
| 70 and 90 are Superhets, but at least the 2x45 model of 90 uses the Plate detector (and so does 70).
Also the Atwaters,...morzh — 03:28 PM |
|
Restoring Philco 96
|
| Morzh, Prayers for your mom. I am sure that there was enough pain living through the Holocaust as a child. I pray dail...MrFixr55 — 02:19 PM |
|
Philco 610B oscillator wiring
|
| Hi Dan,
Divide and conquer. First off trry to differentiate between 60Hz and 120 Hz hum. 120 Hz hum has a higher pit...MrFixr55 — 01:49 PM |
|
Restoring Philco 96
|
| Yes, other than takin a toll on your back, they are undeed way more repair friendly than many other Philcos.
To me, som...morzh — 01:04 PM |
|
Philco 610B oscillator wiring
|
| If the wires look like they were this way from the factory (very neat and very dull soldering joints), I'd leave them be...morzh — 12:58 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
