1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Cabinet Restoration
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Threaded Mode
Toner Colors for 37-116
MarkD
Junior Member
**
Posts: 12
Threads: 3
Joined: Sep 2013
City: Glen Ellyn Illinois
#1

09-22-2013, 03:04 PM
Hi all, Im a first time poster and i am hoping someone can help me out with my 37-116 standard dial. I need the mohawk toner colors for this,especially the top corners and the bottom base. I apologize if this has already been answered somewhere. I did try a search but didnt find anything.
Find
Ron Ramirez
Silent Key
*****
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand State, Province, Country: Indiana
#2

09-22-2013, 06:56 PM
Hi Mark, and welcome!

I would suggest the Ultra Classic version of Medium Walnut (not sure of the correct color name in the Ultra Classic version) for the main body of the cabinet, and Ultra Classic Extra Dark Walnut for the top and bottom trim. The Ultra Classic, being dye based, will allow the grain to show through.
--
Ron Ramirez
Ferdinand IN
Find
MarkD
Junior Member
**
Posts: 12
Threads: 3
Joined: Sep 2013
City: Glen Ellyn Illinois
#3

09-22-2013, 07:25 PM
Thanks Ron I appreciate the help very much.
Find
« Next Oldest | Next Newest »




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM

[-]
Who's Online
There are currently 3586 online users. [Complete List]
» 3 Member(s) | 3583 Guest(s)
AvatarAvatarAvatar

>
  1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Cabinet Restoration