Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Stewart-Warner 950 battery set
#16

                Wasn't using a heat gun. Was using a hotplate and pan.
#17

Strange set. It doesn't follow the schematic, not even the battery version of the schematic. Said schematic shows stage trimmer caps that do not exist. It shows a pair 171's as outputs, when the radio itself calls for 12A's. Also has different voltages than the radio calls for. Also odd for such a set to have a dial light, but, there it is. I discovered a short time ago that some of the lack of volume was due to my A battery being a bit low. Charging it up a bit resulted in good room filling sound, not loud, but certainly adequate.
#18

Hi All;
Brenda Ann, Thanks for the Great Pictures.. Is this set a TRF or is it a superhetrodyne ?? Just Courious..
When I was a mixed up kid, me and a friend would put our hands in molten Wax, and then run arround the Yard to cool it off, and repeat untill we had a creepy looking wax hand.. So, you forgot to run arround the yard to cool it off..
THANK YOU Marty
#19

I was weirder. I guess I was what they call goth nowadays. I used to dip my fingers in kerosene and hold them straight up and light them, this in my mid teens. I had a sort of death wish back then. Teen angst? Sure glad I got over it. I was insufferable for a few years, even to myself. It's a wonder I'm still here.
Icon_smile
#20

You have to be a bit weird to tinker with electrical stuff decades older then you are to begin with. As for the nail thing I was a bit of a pyro when I was a teenager, still am to a degree, good thing I didn't have any black powder around.
Regards
Arran




Users browsing this thread:
[-]
Recent Posts
Philco 91 Restore Code ??
I knew that Fluke was the Cadillac so with that in mind what Fluke would you recommend I get?dconant — 03:53 PM
Philco 91 Restore Code ??
Yep. 10W is probably enough. Also, if the meter measures Farads, then it should also have that "Delta" button...morzh — 02:38 PM
Philco 91 Restore Code ??
I measured the current through the resistor I am using as a replacement for the speaker field coil and got 40ma. So that...dconant — 02:32 PM
Philco 91 Restore Code ??
No I'm not saying I don't own a DMM. I have a CCC one (Thsinde 18+). I forgot that could read caps. I did purchase a Flu...dconant — 02:28 PM
Philco 91 Restore Code ??
Are you telling me you do not own any decent DMM, that can measure capacitances from a few pF and up? Even todays CCC (C...morzh — 01:44 PM
Restoring Philco 96
Well, selectivity today, with stations disappearing, is not such a problem for TRF as it likely used to be. Although wh...morzh — 01:42 PM
Philco 91 Restore Code ??
Mike I did that already and can't really get any kind of reading. My little Honeytek A6013L reads 0 on all scales. One s...dconant — 01:38 PM
New member
Well, to be frank, when it comes to radios, especially the older types, a person with no electronic background could be ...morzh — 01:33 PM
Restoring Philco 96
Thanks for mentioning the video you had uploaded. Somehow I missed that post. Just watched your video, and it sounds to ...jrblasde — 01:28 PM
Restoring Philco 96
Joseph well, for now we will have to get by the video I have made, as the final video would not be made before I get a ...morzh — 01:04 PM

[-]
Who's Online
There are currently 4774 online users. [Complete List]
» 4 Member(s) | 4770 Guest(s)
AvatarAvatarAvatarAvatar

>