westinghouse wr-370 console
Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Today I found a interesting console..And I do not ever remembering anyone on the phorm talking about westinghouse radios. Is this radio a good performer? The radio chassics has a bit of rust. The cabinet of the radio is in good shape along with the grill cloth..Has anyone else seen or heard this radio play?  :
Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Whats wrong no one can help me out? I hope someone will grt back to me with some information before the console is sold.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I'm not familiar with that model. With 12 tubes, though, it should be a good performer. If you like it, go get it!
--
Ron Ramirez
Ferdinand IN
Posts: 7,305
Threads: 270
Joined: Dec 2009
City: Roslyn Pa
Hi John
From the diagram looks to be a fairly upper end set. It features a rf amp, separate mixer/ osc tubes, P/P output with a phase inverter tube (unlike most Philco sets) , push button tuning and a phono. Haven't worked on many of the 1940's Westinghouse so don't know if It has rubber wiring. If the price was right I'd get it.
Terry
ps and an Eye tube too!!!
(This post was last modified: 03-03-2014, 09:40 PM by Radioroslyn.)
Posts: 3,156
Threads: 56
Joined: Apr 2011
City: Lexington, KY
A picture or a link would help so we'd know what the radio looked like. But like Ron said, if you like it, then go for it...
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 16,555
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
This has been my approach all along. If I like it, the performance be d**ned.
With that many tubes it cannot completely suck.
Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Going to go back to the consignment shop today (Wed) hope it is still there It was only $25.00. Thanks guys for the incouragement...Lets see what happens when I get it home! I was told by the wife "we have no more room" when we saw it a couple of days ago.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
...and you listen to your wife? Aah, sneak it in when she isn't home a'ready.
But seriously, $25 is a nearly giveaway price, especially for a 12-tube radio...good luck!
--
Ron Ramirez
Ferdinand IN
Posts: 16,555
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
With the cabinet in a good shape and 12 tubes for 25 bucks.....performance is no longer of interest!
Are you kidding me!
Go and grab that before I go and grab it (OK, not I but someone who is close).
Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
The Radio was still for sale. Took it home and the little women gave me a big stare. I told her dont get your panties in a bunch, it only cost me $25.00. She just walked away an did not say anything.
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
Well, you got the radio! Now, I wonder how much grief she will eventually give you over it...
No matter where you go, there you are.
Posts: 4,488
Threads: 424
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Posts: 157
Threads: 12
Joined: Dec 2012
City: Seattle, WA
Searching in RMorg, I don't see that Westinghouse ever sold a console bigger than 12 tubes before WWII. There were 2 versions; in '37 there was single-IF with AFC, and in '38 there was two-stage IF, no AFC.
Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Guys the cabinet is in really good condition, maybe a little GOJO to get it cleaned up. But the innereds of the radio has a little bit or more than a little bit of rust. It must of have been stored in a damp place. Hay but for $25.00 Lets see .....No loss or gain...If the tubes check out OK it was a win...win....
Users browsing this thread:
|
Recent Posts
|
I'm starting to restore a Philco 16X, I need spare parts. Help me find it
|
Arran. As always, the information you have provided is very valuable to me. Thank you. Yes, it is a Canadian Philco 316A...RadioSvit — 04:04 PM |
Philco 42-345 Restoration/Repair
|
Best to use the one from the library on this site, then when you refer to part 30 we know which part you are referring t...RodB — 03:32 PM |
52-942
|
Welcome to the Phorum, Ken! The included schematic for your set is located in the Philco Library at the bottom of our Ho...GarySP — 03:13 PM |
Video Source for Predicta
|
You can also source a used VCR and use that as a modulator to feed your DVD source into.TV MAN — 02:57 PM |
52-942
|
Just received my 52-942. Its a handsome set. When I opened the back to examine it I noticed there are not connecting wir...Ken Arroyo — 02:54 PM |
Philco 42-345 Restoration/Repair
|
"Your radio tubes get these voltages from the power transformer secondary windings. The A voltage is supplied by th...osanders0311 — 01:40 PM |
Philco 42-345 Restoration/Repair
|
Please correct me if I am wrong, while working on this radio I noticed under the chassis where the bottom of the tubes p...osanders0311 — 01:28 PM |
Philco 42-345 Restoration/Repair
|
"BTW there's a 2.2k resistor from B+ to one of the XXL tubes so you have to identify those resistors before you rep...osanders0311 — 01:04 PM |
Philco 42-345 Restoration/Repair
|
BTW there's a 2.2k resistor from B+ to one of the XXL tubes so you have to identify those resistors before you replace t...RodB — 11:08 AM |
Philco 42-345 Restoration/Repair
|
Okey dokey, let's get on the wayback machine. Back when radios were running on batteries, they were powered by three DC ...RodB — 10:34 AM |
Who's Online
|
There are currently no members online. |
|

|