Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Cap #66 on Philco 41-608
#1

Hi,

I have a print of the Philco 41-608 and capacitor #66 off the plate
of the "2nd Det/AVC/1st Audio" tube (7C6), goes nowhere. One
end is tied to the plate as I say but the other end is "floating" and
I don't see a line from it to show what it connects to. I'm assuming
the diagram is incomplete and maybe someone has a better print
showing where this capacitor is to be connected. It shows a value
of 100uuf. BTW it is a "Code 122" chassis.

Thanks for your help!
Harlan
#2

both of my scans show no connection,must be a "space charge" cap? Icon_lol
#3

Looking at the paper version of Rider, it appears the draftsman did not complete the chassis symbol to indicate a chassis connection. Would make sense for this cap to be connected to chassis ground to suppress higher harmonics.

Richard
#4

Thanks to both.

Yes, I did track it down on the radio itself and it is a mica connected
to the chassis. Just wanted to be sure but thanks a lot for your time!

Icon_smile

Harlan




Users browsing this thread:
[-]
Recent Posts
Model 96 cabinet veneer
I can't figure out what the first step is, let alone the final step. I have tried copying pictures from my hard drive a...TGLager — 01:40 PM
Philco 38-2 Low Volume
I managed to get some more time on this. Hi Mr. FixIT, The radio has been recapped. Many of the resistors were rep...dconant — 01:39 PM
Philco 38-2 Low Volume
Thanks guys for the help. I started looking at these points but I have to quit for the day. I will be looking into this ...dconant — 12:23 PM
RCA WV-98c
Check out this crazy zero pot operation. Touching it drives it crazy. Its rubber tipped. Also the 6al5 has no negative v...daveone23 — 12:08 PM
Philco 38-2 Low Volume
If you check all of that and still have a problem (my first inkling would be one of the 6F6s) then look at the 6J5 phase...RodB — 10:44 AM
RCA WV-98c
Those will probably depend on teh switch combination. Could you list some that you see, their values and what they sh...morzh — 10:26 AM
Model 96 cabinet veneer
You are probably skipping the final step. Once you select the photos you want and they get downloaded, the system assign...RodB — 09:36 AM
RCA WV-98c
At this point, there is no input, just internal voltages Which are incorrect and not sure what they should be.daveone23 — 09:15 AM
Philco 38-2 Low Volume
Hi DConat, Generally, the lower the plate voltage the less negative the grid voltage has to be. Since the plates an...MrFixr55 — 09:27 PM
RCA WV-98c
If I had it in front of me, I would triy to trace the signal on one of the non-working functions. Try to trace and high...morzh — 08:21 PM

[-]
Who's Online
There are currently 1228 online users. [Complete List]
» 1 Member(s) | 1227 Guest(s)
Avatar

>