Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Also a newbie
#1

I'm attempting to become familiar with a Philco Transitone clock radio that my family gave to me on the occasion of my 60th birthday. This is my first vintage radio. I had mentioned a casual interest in trying to locate a 1954 model year radio. Now I have one!
My question: Where do I start?
I did do a search for pictures of this era Philco radio. What I come up with is a Model #53-701X. The radio pictured seems to be very close to what I have, but not exactly. Should I be looking for something like a # 54-701X?
I'm wondering if anybody could help me to get started on my familiarity of this clock radio? Will I be able to locate an original set of directions for this radio?
Any assistance would be greatly appreciated.
Thank you,
Bill Steach
bsteach@sbcglobal.net
#2

Hello and welcome!

You can find pictures of 1954 model Philcos here:

http://www.philcoradio.com/gallery/1954.htm

I looked up the 53-701 to familiarize myself with what you are looking for. If your Philco truly is a 1954 model, it should be either model B710 or B711. It was at the beginning of the 1954 season that Philco stopped using the model year prefixes and switched to a letter system (B=1954, C=1955, D=1956. etc.).

http://www.philcoradio.com/age.htm

--
Ron Ramirez
Ferdinand IN
#3

Hi Bill, welcome to the Phorum!!   Icon_wave  Lots of friendly people here always happy to answer questions. Of course you realize this may be your first in a long series of radios.  Once bitten by the bug it's hard to give it up!  
#4

Bill


Even if the radio is restored, be carefull operating it, Transitones are mostly AC/DC sets without transformers and present some hazard when used near grounded objects or in basements.
GFI outlet helps.

Mike


PS. If it has not been restored, do not attempt plugging it in.
#5

Welcome. Sri I don't have anything to offer regarding that particular radio but, again, welcome, and you have come to the right place..

-Also Bill
#6

WELCOME!!
#7

Welcome aboard and good luck with your radio.
#8

Welcome Bill! This may be your first old radio but I doubt it will be your last.

Gregb
#9

(10-08-2014, 02:27 PM)bsteach@sbcglobal.net Wrote:  I'm attempting to become familiar with a Philco Transitone clock radio that my family gave to me on the occasion of my 60th birthday. This is my first vintage radio. I had mentioned a casual interest in trying to locate a 1954 model year radio. Now I have one!
My question: Where do I start?
I did do a search for pictures of this era Philco radio. What I come up with is a Model #53-701X. The radio pictured seems to be very close to what I have, but not exactly. Should I be looking for something like a # 54-701X?
I'm wondering if anybody could help me to get started on my familiarity of this clock radio? Will I be able to locate an original set of directions for this radio?
Any assistance would be greatly appreciated.
Thank you,
Bill Steach
bsteach@sbcglobal.net
#10

Thank you for the greetings. I appreciate it. I imagine vintage radio collecting could become a bit of a hobby. I hope that I will keep my new venture in proper balance! Now I will now peruse the 1957 product line in an attempt to acquire one that is from my wife's birth year. Any recommendations?
Thank you also, Ron, for steering me directly to the 1954 models. My radio certainly appears to be a B710 rather than the depicted B711.
I do have a question. On the Sessions Movement clock, mine has a plug, or a blank cover, at the six o'clock position, whereas on the B-711 model there is a knob. Any information on an additional feature that is not on my clock?
Many thanks,
Bill
Sonoma, CA




Users browsing this thread:
[-]
Recent Posts
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM
The list of my radio & TV collection!
Magical chords of forgotten melodies, old nostalgic music on an old radio... Saturday night blues on the Mid-Waves on an...RadioSvit — 12:20 PM
Philco 42-345 Restoration/Repair
Thank you MrFixr55 the issue with this radio is that the internal coil antenna is missing and there was a wire in its pl...osanders0311 — 11:34 AM
Philco 610B oscillator wiring
Regarding the oscillator circuit which is comprised of the 6A7's cathode, control grid, and screen grid. These elements ...Radioroslyn — 10:33 AM
Philco 42-345 Restoration/Repair
Hi OSanders, First off, welcome to the Philco Phorum where Phine Phamily-Phriendly Pholks Phull of Philco Phacts and P...MrFixr55 — 08:41 AM
Philco 42-345 Restoration/Repair
Today I've been reading through the site trying to learn more about this radio. I also soldered the lose power cord cabl...osanders0311 — 08:24 PM
Philco 610B oscillator wiring
Thanks David! I do have that same later prodution model 610 schematic. I've also studied the Philco service bulletins fo...Tubester — 08:12 PM
Philco 610B oscillator wiring
Some info from Beitmans says late production. David   David — 06:06 PM

[-]
Who's Online
There are currently 2427 online users. [Complete List]
» 4 Member(s) | 2423 Guest(s)
AvatarAvatarAvatarAvatar

>