Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 42-345 grille cloth and knob decals
#1

Hi guys. I was wondering if a person can get exact replacement grille cloth and decals knobs for a Philo 42-345. Thanks! Brian
#2

Welcome to the Phorum!!
Check RadioDaze for decals.  The knobs on that one are a little unusual so try the folks that Ron has listed as resources for knobs.  David, Julie, Kelton and Mike supply original knobs.  I've bought from all but Kelton in the past.  You may have to try them all as they don't have every knob for every radio. The grill cloth looks a bit like the whiskey rayon that Kenneth Richmonds sells but its a little hard to see in the 42-345 photos I was looking at.  
#3

no no no whiskey rayon!


It is like carpeting and I used one off ebay that matched pretty good.


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

Hi. I know this is an old thread, but I have the same radio and looking for grill cloth. Can you tell me where you found that one or a name for it?
#5

Welcome MamaJennie! Nichael Katz has a site called Radio Grill Cloth. Good source for fabric.
https://www.radiogrillecloth.com/
Try Radio Daze for knob decals.
https://www.radiodaze.com/decals-48/
Hope this helps. Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
#6

I’ve recently used both Michael Katz’s fabric and Radio Daze’s decals for a radio of my own. I can attest that you’ll be most satisfied.

My only advice, when ordering the decals, is to make sure that your decal kit includes the “Philco” decal. The kit I ordered had all other decals but not this one, so I needed to order a separate Philco decal. I noticed that other decal kits do include the branding, so just be mindful!

Joseph

Philco 46-480
Philco 49-906
#7

Another learning experience I had. You will benefit tremendously from purchasing decal softener and setting solutions such as Micro-Sol and Micro-Set, AK Interactive Decal Setting Solution, or the like. This will really help to conform the new decals to the surface of your radio and will eliminate the laminated look of your decals.

Joseph

Philco 46-480
Philco 49-906
#8

Thank you. Where would I find those products?
#9

Right now Mike is probably the only good source of Philco-specific cloth, as well as others (I bought both Philco and RCA from him).

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#10

Hello MamaJennie. Just click on the highlighted web addresses in post number 5. Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
The list of my radio & TV collection!
Peter; I found an old thread on the ARF, I was wrong about when Rogers took over DeForest Crosley, it looks like it wa...Arran — 06:15 AM
The list of my radio & TV collection!
Thank you Arran, this is very interesting information. With your permission, I will definitely use it when I make a vide...RadioSvit — 04:14 AM
The list of my radio & TV collection!
Peter; For a start your DeForest Crosley 6D632 was a 1936-37 model, and I believe it had six tubes, and 3 wave bands,...Arran — 03:07 AM
AES type of Battery Eliminator has hum in B+
This is interesting, they actually designed the B+ side with some form of voltage regulation, I think? Most of the B+ su...Arran — 02:21 AM
AES type of Battery Eliminator has hum in B+
They are trying to use a regulator. Essentially it is an LDO schematic. LDOs are supposed to greatly reduce ripple, so t...morzh — 12:11 AM
AES type of Battery Eliminator has hum in B+
So, I just built a 90 volt 40ma battery eliminator for a farm radio and had to use 1000 mfd for the input filter cap to ...RodB — 10:31 PM
AES type of Battery Eliminator has hum in B+
Caps of 1,000 uF 250V are about $7 in Mouser. C1 could be increased. A NTC inrush limiter could be employed to limit t...morzh — 10:24 PM
AES type of Battery Eliminator has hum in B+
Bruce B — 09:41 PM
AES type of Battery Eliminator has hum in B+
Bruce Could you post the schematic if this power supply?morzh — 09:31 PM
AES type of Battery Eliminator has hum in B+
Hello All, I have built a battery eliminator using the most popular AES K101a. Using plans and all the AES parts  order...Bruce B — 09:27 PM

[-]
Who's Online
There are currently no members online.

>