Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Model 70
#1

Good afternoon, I just got a Philco Model 70 from our local flea market today for $50. It is in pretty good shape but it looks like someone used polyurethane finish on the cabinet so it looks like I'll have to strip and refinish the cabinet at a later date. The speaker is good but under the chassis there was quite a few paper capacitors paralleled with the bakelite blocks so I removed them and the hideous grille cloth someone installed will have to go. The Mershon capacitors are still connected in circuit but I didn't power it up. The chassis is quite dusty but looks like it is in excellent shape. I checked the coils and found none with open windings which is common on this model--hopefully the radio will work after it is restored due to all the work done on it before I got it. I have photos attached and my cat Snowball was inspecting the radio too Icon_biggrin .  Ken


Attached Files Image(s)
               
#2

I have already forgotten by now how spacious the 70 under chassis is.

Not a bad buy for $50.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Try some alcohol on the cabinet first before you strip it, sometimes people used to slob shellac on older pieces of furniture, though I don't entirely know why since it usually looks worse afterward.
Regards
Arran
#4

Thanks Arran, I'll try that before I go any further on the cabinet. I got done cleaning the top of the chassis, checked the tubes and polished the Mershon capacitors. I'll start restuffing the bakelite blocks later today--I noticed the 2 metal capacitor blocks are gone but I found out where they connected originally.  Ken
.


Attached Files Image(s)
   
#5

The top of the chassis cleaned up beautiful and the underneath is nice, too! Man, if you can salvage the finish on the cabinet, it'll be a great looker, to boot! Congrats! Does Snowball approve of the new appliance?
#6

I am pretty sure Snowball will only assess it from the point of view of acquiring a new scratch post, so as much as I like cats, I would tell him to stay away Icon_smile

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#7

Hello everyone, Snowball got to check it out for a short time before I brought it upstairs though I wouldn't have mind if she scratched the awful grill cloth that was put on it. When I got my 37-690 my brother and I got it upstairs quickly so the cat wouldn't scratch the cabinet. Snowball isn't allowed upstairs as it is where I display all my radios. After I get the chassis restored I'll start on the cabinet--it is a small cabinet so it shouldn't take too long to strip and refinish it. Ken
#8

The chassis looks great! Once the cabinet is done, it will look awesome. Please share pics when done.

Tony

“People may not remember how fast you did a job, but they will remember how well you did it”
#9

Nice set, Ken ... with the exception of that grill cloth!  That's gotta go!  Somewhere someones grandmother has a set of living room curtains with a big hole cut in them!  Take care, Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan




Users browsing this thread:
[-]
Recent Posts
The list of my radio & TV collection!
Magical chords of forgotten melodies, old nostalgic music on an old radio... Saturday night blues on the Mid-Waves on an...RadioSvit — 12:20 PM
Philco 42-345 Restoration/Repair
Thank you MrFixr55 the issue with this radio is that the internal coil antenna is missing and there was a wire in its pl...osanders0311 — 11:34 AM
Philco 610B oscillator wiring
Regarding the oscillator circuit which is comprised of the 6A7's cathode, control grid, and screen grid. These elements ...Radioroslyn — 10:33 AM
Philco 42-345 Restoration/Repair
Hi OSanders, First off, welcome to the Philco Phorum where Phine Phamily-Phriendly Pholks Phull of Philco Phacts and P...MrFixr55 — 08:41 AM
Philco 42-345 Restoration/Repair
Today I've been reading through the site trying to learn more about this radio. I also soldered the lose power cord cabl...osanders0311 — 08:24 PM
Philco 610B oscillator wiring
Thanks David! I do have that same later prodution model 610 schematic. I've also studied the Philco service bulletins fo...Tubester — 08:12 PM
Philco 610B oscillator wiring
Some info from Beitmans says late production. David   David — 06:06 PM
Restoring Philco 96
Oh wow! Just found this thread.  Brings me back to early days on this phorum.  I did a 96 back in 2017.  Thread here: ...rfeenstra — 06:05 PM
Philco 610B oscillator wiring
Thanks for the replies. It's not the really the hum that I am after. Just trying to understand why only the shortwave ba...Tubester — 04:01 PM
Restoring Philco 96
70 and 90 are Superhets, but at least the 2x45 model of 90 uses the Plate detector (and so does 70). Also the Atwaters,...morzh — 03:28 PM

[-]
Who's Online
There are currently no members online.

>