The radio, that was tucked away. (42-1013)
Hello everybody; my name is Matt I'm from New Jersey and I am 19 years old.
Recently my great uncle passed away he was 100 years old, he would stay with us a lot when I was younger and because our family was concerned about him living alone he eventually migrated to our home and moved in with us around 1993/94 a few years later he sold his house, and moved most of his stuff he thought was valuable or that he wanted to a storage unit and over the years never went to look and sort out the stuff at the storage unit, so it sat there until he passed and our family had to go over there and clean it out. During this process we found alot of old fashion goodies, among those alot of his military papers, and his uniform, a 1950s Dumont TV, and this Philco tube type radio (model number unknown)
I'm afraid to plug the radio in because the wire looks disintegrated and definitely not safe
Can anyone help me idenify this unit? I can provide more photos.. Is it possible to bring this back to life and have it rewired, is there a such thing as 'getting new tubes' ? Sorry all this stuff is foreign to me... But I learn quick so don't knock me as a noob to badly. Photos attached below.
[Image: http://lh5.ggpht.com/_wQzOLDIeXzM/S3SoRt..._0560E.jpg]
[Image: http://lh3.ggpht.com/_wQzOLDIeXzM/S3SoR7..._0562E.jpg]
[Image: http://lh3.ggpht.com/_wQzOLDIeXzM/S3SoSS..._0564E.jpg]
[Image: http://lh4.ggpht.com/_wQzOLDIeXzM/S3SoS3..._0565E.jpg]
Edit: Added model number to thread name.
Posts: 217
Threads: 40
Joined: Dec 2009
GO TO PHILCO RADIO.COM GO TO GALLERY FIND IT THERE. I AM NEW HERE TO JUST HANG ON GET ALL KIND EXPERT ADVISE SOON.
DENVER
Thanks for your reply Denver, I already went through the philcoradio website gallery and did not find anything matching. I'm sure some of the experts will be able to identify it.
-Matt
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
DO NOT PLUG IT IN unless it's fully restored!!!
A 1942 Model 42-1013 radio-phono combo; AM, FM and SW. Fairly hard to find. Has the unique Beam-of-Light tonearm changer.
See Beam-of-Light section on my site. Note that on this pre-war set, the FM band is the older 42-50mHz. band before it was shifted to the current 88-108mHz band. There is no FM broadcasting in the 42-50mHz. region.
BTW, there should be a paper tag on the inside of the cabinet with the model number and possibly the rear apron of the chassis should also have a black ink-stamped model and code number as well.
Is the record changer missing? You don't show it pulled out in your picture series.
Chuck
Quote:DO NOT PLUG IT IN unless it's fully restored!!!
Believe me, I have no intention to, I don't want to possibly ruin it, or get thrown on my rear.
Quote:Is the record changer missing? You don't show it pulled out in your picture series.
I assume you mean the record player? (thats what I know it as) no the record player is not missing, I can post up photos of it pulled out, and I can also get shots of the chassis and some other details. Thank you so much for identifying it.
-Matt
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Djonemore Wrote:Thanks for your reply Denver, I already went through the philcoradio website gallery and did not find anything matching.
You can find it here:
http://www.philcoradio.com/gallery/1942a.htm#bb
I see Chuck has already identified it for you - good job, Chuck!
Matt, I've always thought that cabinet was one of Philco's best looking consoles. Congratulations on your acquisition!
To reiterate what Chuck has already warned you about: You mentioned the wire looking disintegrated. The wiring underneath the chassis is probably just as disintegrated... which makes it even more imperative that you heed Chuck's warning and do not plug it in until it has been restored!
--
Ron Ramirez
Ferdinand IN
Quote:You can find it here:
http://www.philcoradio.com/gallery/1942a.htm#bb
I guess I went flying through the pages a little quick and missed that... But thanks for pointing that out. I see the original selling price is $230, what would that equal out to today? Where can I have it restored?
-Matt
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
$230 in 1941 when these sets were put on the market translates to $3,356.70 in 2009 dollars.
http://www.usinflationcalculator.com/
--
Ron Ramirez
Ferdinand IN
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
You are a lucky young man to have inherited that set, especially in such nice shape the beam of light changer is an amazing gadget for it's time. The DuMont TV sounds interesting, but it would be best to ask about it in the non Philco section here or about it in the television forum on the ARF site, is it a round tube DuMont?
Best Regards
Arran
Ron, thanks for the inflation calculator site...
Arran, thanks for you kind words. The Dumont is a round tube TV, it's bulit in a cabinet. It had to be stored at another family members house because we did not have the room here. Here is a attached photo that was shot as we were moving it from storage. Sorry about the shanky quality...
[Image: http://lh5.ggpht.com/_wQzOLDIeXzM/S3sDog....21.51.jpg]
Below is another photo I snapped (and forgot about) of the internals of the Philco (42-1013) while we were moving everything from storage.
[Image: http://lh3.ggpht.com/_wQzOLDIeXzM/S3sDo9....22.39.jpg]
Edit: Here is the high resoloution photo of the same photo so you can see a little more detail
http://lh3.ggpht.com/_wQzOLDIeXzM/S3sDo9....22.39.jpg
Posts: 149
Threads: 4
Joined: Oct 2005
City: Sullivan, MO
That DuMont looks like it might be an RA-109 model from 1950. I have an RA-113 that is a 1951 model with the continuous tuner that covers FM as well as an AM tuner and phonograph. I'm going to restore it one of these days. DuMont was the Cadillac of TV at this time. You might want to post on the Video Karma forums about it. There are a number of vintage TV collectors and restorers over there.
Sean
WØKPX
Posts: 1,472
Threads: 89
Joined: May 2008
City: Omak
State, Province, Country: WA
Hello Djonemore,
Wow I think you hit the jackpot with both of those items .
Far as that Philco it would be great to be able restore it .
I bet would make your Unlce happy to see it in good hands .
Sincerely Rich
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Matt;
When you get around to the DuMont there are a couple of guys on the television forum over at the Antique Radio Forums who have restored old DuMont TVs from that era. At least it looks like the picture tube is still holding it's vacuum, no dark bullseye in the middle of the screen or anything. One thing that it will likely need is the tuner taken apart, cleaned, and lubed, if it hasn't been used for a long time as the old grease sometimes hardens up. It's sort of a strange design, it rotates continuously like a radio dial rather then having a click for each station, because of this most also have an FM radio band.
One thing that I would suggest before you work on either the big Philco or the DuMont is that you pick up a five or six tube radio to work on for practice, some say a series string AC/DC set but a smaller transformer set would be more comparable to the Philco. If you can figure out how to solder and use a volt ohm meter you should be able to get the Philco and the DuMont working again if nobody has messed with them with goofy repairs or modifications, it just takes time and patience. You can pick up a decent digital volt ohm meter in some hardware stores or a Radio Shack, you can get almost any other tools or test equipment you need from a ham fest, sometimes parts as well. If you need any help you know where to call.
Best Regards
Arran
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
40-150 General questions
|
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM |
40-150 General questions
|
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM |
40-150 General questions
|
Hi Kevin,
No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM |
Philco 38-7 Speaker
|
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM |
40-150 General questions
|
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM |
Who's Online
|
There are currently 2704 online users. [Complete List] » 1 Member(s) | 2703 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|