Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 66, 37-61, and 38-10, Evolution Of A Design
#1

I have restored all three of these radios over the years, and the detailed threads on the work can be found here:
Model 66B
Model 37-61B
Model 38-10
However, a quick look at their schematics tells the tale. From the Model 66, to the Model 37-61, to the Model 38-10, we see the evolution of a 2 band All American 5.

[Image: https://64.media.tumblr.com/5508e135e754...0d8553.jpg]
[Image: https://64.media.tumblr.com/1fbee4fddbf3...660aa0.jpg]
[Image: https://64.media.tumblr.com/32a6c8e58d00...4df859.jpg]
Even their frequency coverage is similar:
Model 66  540 - 1720 KC and 5.7 - 18 MC
Model 37-61  530 - 1720 KC and 5.7 - 18.2 MC
Model 38-10  540- - 1720 KC and 5.7 - 18 MC

Over the years the styling changed from the "beehive" cabinets of the 66B and 37-61B to the "bullet" styling of the 38-10T. The performance improved only slightly, but is surprisingly good for radios without a tuned RF amplifier stage before the mixer oscillator. They cover the entire AM broadcast band, and the old "low police band" which was popular for people to listen to police calls back in the days when it was used, just as police scanners are today. The shortwave band covers all the frequencies most often used for international broadcast. With a decent antenna they pull in the stations surprisingly well.
#2

Hello mike,
very interesting.

Sincerely Richard




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! Gary P.S. Can't get the right color you need? I ...GarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM

[-]
Who's Online
There are currently no members online.

>