Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Bakelite block value in a 46-1201 turntable
#1

I'm working on a Philco Bing Crosby 46-1201 code 127 and there is a bakelite block under the turntable. It is a 3903-ODG. I've tried every resource I can find including the Philco library here but can't find the value of the two caps inside. Any help appreciated...Bill
#2

Here is the page. Pick your exact part.


Attached Files Image(s)
   

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Thank you...thats what I was looking for. Every place I looked left out the values.
#4

That's from Ray Bintliff's Capacitors book. If you ever have a chance to buy it off of someone, do it.

I was lucky enough to be told that he was selling the last batch he had, shortly before he passed away in 2020, and I acted quickly.
I hope, as a dedicated radio man, he would not mind if someone made a good quality scan of the book and put it online to benefit all of us.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#5

Ray would be thrilled though no longer among us he is helping the Hobby.

Paul B

Tubetalk1
#6

Good to know. If I ever run across that book I will get it. Every place I looked did not show the cap value. Some places I looked didn't even list that number of block. So, yes, even now his book is helping others.
#7

Just ordered the book! Posting a link.   http://www.antiqueradio4.com/Merchant2/m..._Code=AUTO
#8

If indeed it is in stock, this is the price that I paid.

I strongly recommend ordering them while they last.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#9

I consider this is must have for Philco radio work and I have used mine many times.

Greg B
#10

In case anyone wonders about the man behind the book, Ray was the personification of the term "gentleman"'
He was our Club Membership Secretary for years, resident expert, wizard out of all things elusive in a chassis.

A truly great guy.

https://memorials.actonfuneralhome.com/r...f/4071518/

Paul

Tubetalk1
#11

About a hour after ordering the book got a call from a gentleman concerning my order. There soft ware had no place for the 3 digit security code gave the gentleman the code and good to go. Had a nice talk about Ray. My copy will be shipped today book rate by the USPS. Take care and stay warm David
#12

Book is in the mail received tracking number.
#13

Went to the Post Office this morning and now have the book. Not sure when it arrived as I only check my mail once maybe twice a week. Think I will order some more of his books. Take Care David
#14

The practical radio repair part 1 and 2 are good, cover a lot, some you may already know, but thorough.

Paul

Tubetalk1




Users browsing this thread:
[-]
Recent Posts
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM
The list of my radio & TV collection!
Magical chords of forgotten melodies, old nostalgic music on an old radio... Saturday night blues on the Mid-Waves on an...RadioSvit — 12:20 PM

[-]
Who's Online
There are currently no members online.

>