Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

42-1009 Decals
#1

Hi, does anyone have a picture of the decals for the 42-1009? I need to know where they go and what they are supposed to say. Thanks!
#2

Sorry Jeremy,

I don't have a 42-1009 but I can probably look up which decals you need. Give me a day or so.

--
Ron Ramirez
Ferdinand IN
#3

Thanks, Ron! I've got a vague idea that they should be curved and from left to right say something like "Tone" (or "Bass"???), "Volume", "Phono-Bands", and "Dial Tuning" but obviously I'd like to be certain before I slap anything on there. Thanks for your help!
#4

I believe you are correct.

I don't have one to look at, as mentioned before. But I think you will be OK with decal set DCL-41-608 from Radio Daze. This includes "BASS" (with curved arrow), "VOLUME," "DIAL TUNING" and "PHONO-BANDS."

The decals apply, from left to right, in the order given above (BASS - VOLUME - DIAL TUNING - PHONO-BANDS).

--
Ron Ramirez
Ferdinand IN
#5

Thanks, Ron. I've used Radio Daze before, and I'm pretty happy with their products. I'll pick up this set on my next order from them.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM
Philco 42-345 Restoration/Repair
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM

[-]
Who's Online
There are currently 1225 online users. [Complete List]
» 1 Member(s) | 1224 Guest(s)
Avatar

>