Posts: 2,023
Threads: 365
Joined: Jun 2010
City: Dover, OH
Not sure where to post this, but I'll start here. I travelled about 2 hours today to get to what was supposed to be a very large flea market being done to help a pet shelter. Well, it was large, but barely anything I was interested in besides an over-priced Victrola that had been painted brown. On the way back home, I found an antique store and stopped in there. Definitely more interesting and bigger inside than I thought it was. I was feeling like I was going to strike out though, until I found this sitting on one of the tables.[attachment=0]
I have heard of these little guys and have even seen pictures of a few, but to see one in the flesh is really neat! I called a friend and asked his advice and he said to grab it for the price, even though the CRT condition is not known. I am broke now, but glad I got the little TV. Even if it never works, it is such an interesting piece and so small for its time. Wish the picture tubes for them weren't so rare.
No matter where you go, there you are.
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
Nice set! If you what to get some advise for on this little rascal go visit my friends over at
http://www.videokarma.org/
Go to the early B/W section.
Enjoy
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 893
Threads: 9
Joined: Mar 2008
City: Vieques, PR USA
State, Province, Country: PR
Hi, nice find! I got one several years ago in a trade and I was tickled to get it. It was in "working" condition although it had been recapped by pigtailing orange drops throughout. Really messy job but it did work. CRT is good and I improved some of the linearity problems by going to different caps in certain places in the circuit. I've seen these sets sometimes with darn near perfect linearity.
They aren't difficult to work on. In many respects they are more like a typical radio circuit with a CRT than a conventional television set. Mine is nothing to brag about and the set isn't really something you can sit and watch but it is very cool nonetheless when you see an image on such a crude machine!
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
I'm not an old TV collector, but man, does this set bring back some memories! I had one of these sets when I was a boy on northern NY. My Da got it from his TV repair guy, even in the 60s this set was considered just an old set, maybe good enough for a kid's room.
I managed to get an antenna for it by walking the streets of Potsdam during trash day. Back then you could find old radios, tubes, lawn mowers that people left on the curb for trash pickup.... junk to adults but gold to a kid like me.
I climbed an old and very tall elm tree that was near my bedroom window and re-assembled the antenna near the top of the tree, and ran a paired antenna line into my bedroom window. The reception was still crappy, as back then you only had 2 stations up there to select from. One in Canada and one in Burlington, VT. BUT, it was MY tv and MY antenna. I was pretty proud.
My parents either didn't notice my antenna or didn't care. Probably didn't notice, as I always had somthing going on. This was around the time that I thought building a flathead V8 engine in my bedroom was a good idea, an idea that DID get my parents notice and immediate disapproval. Like I said, I always had somthing going on......
Anyway.... months later I was watching the Milton Berle show during a lightning storm. Lightning struck the antenna, smoked the TV, and d**n near started my room on fire.
Interesting in that it also smoked the radio in my brothers room and a clock in my parents room, and blew nearly every fuse in the basement. Our house was full of smoke.
Also interesting how lightning can significantly raise the interest level one's parents have in one's TV antenna.
I took what was left of the antenna system down the following day.
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
Great story Tom!
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 2,023
Threads: 365
Joined: Jun 2010
City: Dover, OH
Thanks for the info and links guys. I am hoping to get this set going enough to put in the bedroom at the house and try watching some Jack Benny on it on Sunday nights. ![Icon_biggrin Icon_biggrin](https://philcoradio.com/phorum/images/smilies/icon_biggrin.gif) Time will tell though. I also enjoyed the story and it reminded me about an odd TV antenna connector I have. They used to sell clips that you would connect your antenna wire too, then just clip onto the two screws on the back of the set. My grandparents used these because when a bad storm hit they would simply unclip the antenna wire and toss it back out the window it was piped through.
No matter where you go, there you are.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yes, the clips were where one connected a flat antenna wire that had two parallel conductors in it. The other end went to your antenna.
Posts: 2,023
Threads: 365
Joined: Jun 2010
City: Dover, OH
Well, if I was on the right pins, I got good continuality on the CRT filament. Not sure if it has any emission left, but at least it is not burnt out.
No matter where you go, there you are.
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Now the kids are watching videos on their 2 inch phones, so what has been gained in these many decades?
Posts: 2,023
Threads: 365
Joined: Jun 2010
City: Dover, OH
codefox1 Wrote:Now the kids are watching videos on their 2 inch phones, so what has been gained in these many decades?
Well, color and smaller size I guess. But, those phones last what.. an average of 18 months according to studies? I'll bet these little Pilot sets got more mileage than that, even with the filament issues. Besides, my Pilot set is cooler than a video phone.
No matter where you go, there you are.
Posts: 893
Threads: 9
Joined: Mar 2008
City: Vieques, PR USA
State, Province, Country: PR
codefox1 Wrote:Now the kids are watching videos on their 2 inch phones
![Icon_smile Icon_smile](https://philcoradio.com/phorum/images/smilies/icon_smile.gif) Well, you can hold those little phones right up to your face (while you're driving or walking down the sidewalk) . Try that with a TV-37 - haha
Jayce, in case you didn't know it already they sold an external magnifier that can go over the picture tube on the Pilot. Increases the image size by a bit. They are quite scarce to find, though.
-Bill
Posts: 2,023
Threads: 365
Joined: Jun 2010
City: Dover, OH
I've seen images with the magnifier on the set and it looks neat, but I guess they hooked right onto the grill bars! ![Icon_eek Icon_eek](https://philcoradio.com/phorum/images/smilies/icon_eek.gif) From what I have read, the magnifier usually either broke or bent the bars over time. My Pilot has virtually perfect grills on it, so it probably never had the magnifier.
No matter where you go, there you are.
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
If the CRT is still good it is highly recommended to modify the filament circuit so as to avoid burning out the CRT filament, usually by giving the CRT it's own dedicated filament transformer although I have heard of some mod involving current limiters or thermistors.
Regards
Arran
Users browsing this thread:
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
Who's Online
|
There are currently 4096 online users. [Complete List] » 2 Member(s) | 4094 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|