Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 322 performance
#1

Greetings all, am new to the Phorum and have enjoyed reading it and have learned much just as a visitor in the past. Though I do not yet own any Iconic Philcos I have a few and have good luck with some later model years. I have had excellent results for small 6 tube AC/DC table set with the 42-322. It has a farly unique internal antenna and I have great luck dxing the broadcast band up here in the Boston area. Has anyone else any experience with this set they would like to share? Any tips for enhancing reception? Icon_smile

Tubetalk1
#2

I have a 42-322 that is still working on all the original caps and electrolytics that I bought for $10 about 5-6 years ago. This is a good little table radio by Philco, though most have cabinets that look well used around here, mine included. Mine was my 'daily driver' when I was working afternoons at work. I'd come home, turn it on, and often leave it on all night as I slept during the winter. Only tip I can offer right now is this: if your radio seems to turn off and on by itself, check the output tube and/or the rectifier tube. Mine was acting strange and haunted one night, turned out the output tube had burnt out the filament from age and use. Radio would slowly lose power, then would come back on slowly a minute later.

No matter where you go, there you are.
#3

Thanks for the information. My 42 322 has undergone a complete retoration by a talented technician(not me). It has all strong tubes and probably is about as good as it was out of the box. The cabinet is original and mint with the exception of a bad water ring from a glass rested on the radio frequently, always a catch you know. We have a station up here 740 am. that goes down to 5 measly watts at nite to protect 740 in Toronto and the little 322 picks it up well into the nite. Anyway I guess even though the "value engineers" were taking over you can still find a winner in the later model years. I have a 42 345 that is also pretty fine, maybe the most sensitive set I own Philco or other brand. The 345 also shares the same type of antenna, looks like miniature copper plumbing. Thanks again for the information. Regards. Icon_biggrin

Tubetalk1
#4

Ah, the infamous water ring. What was it with people sitting glasses full of water and other liquids on radios? It seems the Philco brand attracted water glasses as I find more Philcos with those spots than any other brand. Most of my other brands of radios seem to lack the rings on the tops of them from water glasses. Odd. Icon_eh

No matter where you go, there you are.
#5

Welcome, Paul. Icon_smile

I used to own a 42-322, and it was a good performer once I got past the roadblocks of rubber-covered wiring. Icon_mad Icon_evil I now have a 42-323 and a 42-327, both of which have basically the same chassis as the 42-322 (the 327 adds pushbutton tuning). The 327 is up and running; I have yet to restore the 323 but it is pretty far down the priority list right now, as I prefer the larger, older Philcos with high tube counts (I'm working on a 1936 model 655 right now between summer classes).

--
Ron Ramirez
Ferdinand IN
#6

Thanks for the information Ron. I guess what makes the 322 a little special for me is that it was my first Philco. I am intrigued by the high tube count big boys from the 30's though have yet to get my hands on one. I do have a 38-93, 5 tube with transformer which sounds pretty good. I have a 45L being worked on now and a 42-355 which I guess is pretty much a console style chassis in a large table model. The 355 has grille cloth which is this funky stuff with almost a corduroy look on it,maybe original, very cool. As you can see I have been getting a little enamored with Philco. Most of my other sets are Zeniths or RCA.

It seems from everything I have read that the 30's were the true heyday of Philco.

Regards. Icon_biggrin

Tubetalk1




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
I'm starting to restore a Philco 16X, I need spare parts. Help me find it
Arran. As always, the information you have provided is very valuable to me. Thank you. Yes, it is a Canadian Philco 316A...RadioSvit — 04:04 PM
Philco 42-345 Restoration/Repair
Best to use the one from the library on this site, then when you refer to part 30 we know which part you are referring t...RodB — 03:32 PM
52-942
Welcome to the Phorum, Ken! The included schematic for your set is located in the Philco Library at the bottom of our Ho...GarySP — 03:13 PM
Video Source for Predicta
You can also source a used VCR and use that as a modulator to feed your DVD source into.TV MAN — 02:57 PM
52-942
Just received my 52-942. Its a handsome set. When I opened the back to examine it I noticed there are not connecting wir...Ken Arroyo — 02:54 PM
Philco 42-345 Restoration/Repair
"Your radio tubes get these voltages from the power transformer secondary windings. The A voltage is supplied by th...osanders0311 — 01:40 PM
Philco 42-345 Restoration/Repair
Please correct me if I am wrong, while working on this radio I noticed under the chassis where the bottom of the tubes p...osanders0311 — 01:28 PM
Philco 42-345 Restoration/Repair
"BTW there's a 2.2k resistor from B+ to one of the XXL tubes so you have to identify those resistors before you rep...osanders0311 — 01:04 PM
Philco 42-345 Restoration/Repair
BTW there's a 2.2k resistor from B+ to one of the XXL tubes so you have to identify those resistors before you replace t...RodB — 11:08 AM
Philco 42-345 Restoration/Repair
Okey dokey, let's get on the wayback machine. Back when radios were running on batteries, they were powered by three DC ...RodB — 10:34 AM

[-]
Who's Online
There are currently 800 online users. [Complete List]
» 1 Member(s) | 799 Guest(s)
Avatar

>