Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Just brought home an EH Scott Allwave 15 from an estate sale, thanks to Ron for instant help in identifying this set from the picture and the encouragement to go and get it. Don't know much about EH Scotts. Chrome looks pretty good, all tube shields and coil covers, transformer shells are present, cabinet only minor nicks here & there, no apparent tears in the Scott pedestal speaker, looks to be complete and this radio, even without the amp chassis in the cabinet is HEAVY! Came with the instructions manual.
I'll post some pix when I figure out how. Got to get my genius brother to help me figure things out I'm not that compooter savvy.
Mike
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
(03-19-2012, 11:50 AM)Mikhail7 Wrote: Just brought home an EH Scott Allwave 15 from an estate sale, thanks to Ron for instant help in identifying this set from the picture and the encouragement to go and get it. Don't know much about EH Scotts. Chrome looks pretty good, all tube shields and coil covers, transformer shells are present, cabinet only minor nicks here & there, no apparent tears in the Scott pedestal speaker, looks to be complete and this radio, even without the amp chassis in the cabinet is HEAVY! Came with the instructions manual.
I'll post some pix when I figure out how. Got to get my genius brother to help me figure things out I'm not that compooter savvy.
Mike
Congratulations, you have a treasure. I'm sure you will take the restoration slow and steady. Withe this type of set, you are self elevated from restorer to curator, if you get my drift.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Hi Codefox,
Thanks, just the look of the chrome shouts CLASS! I had no idea what the radio was in the sale picture so I sent it to Ron. A really quick ID too. He persuaded me I should go for it.
I never dreamed this downtown lackey might actually rub shoulders with the Hahvard gentry. Oh, do turn on the stock report and fluff me, won't you, Gilligan?
Mike
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Hi TA,
Thanks, I think we posted at the same time.
Me, I'd have said who'd a thunk it, this ritzy radio showing up like it did. Ron says he's never seen the style cabinet it's in. It isn't anything really ornate but it's in pretty good shape. I feel very privileged to have found this and the 37-690 in November.
Mike
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Has anyone here ever removed a chassis from the cabinet of this era of an EH Scott? Seems like there's some nuts that require a nut driver for removal from the top, there's nothing on the bottom of the chassis board.
Mike
Posts: 8
Threads: 2
Joined: Jan 2022
City: Christchurch
State, Province, Country: New Zealand
I've just taken one of these sets in for restoration. What a behemoth! After re-stuffing all the wee capacitor cans & replacing all out-of-spec resistors, I have the powered it up. The audio & IF sections are all fine but I cannot get the local oscillator to cooperate. Any suggestions? Also the mixer tube in this particular set is a 58, not a 2A7 as the two circuits I have found, show. The circuit of the audio amp is also a bit different. The detector is the full-wave type using both diodes of the 55 valve and the Radio Museum info suggests that this was employed in a later version of the circuit but the 58 mixer would suggest otherwise. I therefore assume that there are other circuits somewhere out there. All very interesting. Michael, does your manual contain a circuit that you could copy for me please?
Posts: 1,974
Threads: 147
Joined: Jan 2013
City: Westland, MI
Hello Philconut. This thread is over twelve years old. I am sorry to inform you that Michael Dennis passed away several years ago. Looking under his name you see the status "silent key". That's to let others know that they are deceased. Take care and BE HEALTHY! Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
HiFi (Chifi) tube amp build - but my own design.
|
Tim,
nice write up and thanks for sharing !!
Sincerely Richardradiorich — 02:47 AM |
HiFi (Chifi) tube amp build - but my own design.
|
Well, this was a real "Hum-Dinger" :lol: ! This will be kinda long, but hopefully it will help others having t...TV MAN — 01:55 AM |
Shadow Meter Bulb
|
Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM |
Philco 41-608 changer coupler
|
3D-printing...short of machining, of course.
Or molding.morzh — 05:20 PM |
Philco 41-608 changer coupler
|
Thanks, Morzh.
That solves the issue of the rubber pieces. Now, I need to find a way to replicate the pot metal piec...alangard — 05:07 PM |
12' Philco
|
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel.
Kareem would have an e...morzh — 01:48 PM |
12' Philco
|
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM |
Hickok AC51 tube tester
|
I think they have only shown the secondaries of the transformer.
Two of them feed the rectifiers' filaments.morzh — 12:58 PM |
IF can wire size and Rubber mounts?
|
Arran
If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM |
12' Philco
|
Rod,
Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently.
H...morzh — 12:54 PM |
Who's Online
|
There are currently no members online. |
|
|