Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

PHILCO 48-200 BAKELITE TUBE RADIO
#1

Is this radio: PHILCO 48-200 BAKELITE TUBE RADIO, a good one?

Easy to work on; fix and restore?
Is it sort after by collectors?

Any help would be appreciated.

TommyR Icon_smile
#2

All Philcos are good ones Icon_biggrin I have restored a couple of them and were not that hard for a beginner like me. They are fairly common I think but still a nice little radio. Do you have the brown or ivory version?
Chris
#3

Chris Drumma Wrote:All Philcos are good ones Icon_biggrin I have restored a couple of them and were not that hard for a beginner like me. They are fairly common I think but still a nice little radio. Do you have the brown or ivory version?
Chris

Hi Chris:

It's a brown one. It's in excellent shape with the exception of a crack running along the top left of the case.

It was modified, the line cord looks new but very short (non polarized) and one side of the line is going to a 3ag fuse and power resistor, there is also a disc cap or mov across it. All this is placed on a small board affixed to the top of the case inside.

It plays good, although there are more stations coming in from mid to end of band then from the beginning to mid?

Very clean inside and out.

What do you think?

TommyR Icon_smile




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM

[-]
Who's Online
There are currently no members online.

>