Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A Philco identification
#1

Hi from France !

I repaired a Philco receiver recently. It was bought about 25 dollars to a broker. It was completely out of order and I had to work for 3 weeks to put it well...

But I can't find which model it is, neither the year of the fabrication....
I just know it was imported from USA to France just before the Second World War.

I remark the dial is not the same than all those I see while searching on the American web sites. Mine is a metal circular one as you see on the picture. Perhaps the receiver was modified in a french factory before to be sold?

The tubes are 58, 2A7,58, 2A6, 47, 80, (Heating 2,5 volts as you see.)
The intermediary Frequency is 128 Khz.
The set has a three parts variable condenser with a HF amplification by a 58 tube.
Two waves bands: LW (1000 to 2000 m, MW (200 to 550m)
It looks like the 623B or 630B models I saw at http://philcoradio.com/gallery/1936a.htm

You can see my Philco at the following url:
http://hubert.frappier.free.fr/radio/mod...hilco.html

Great thanks for your Helps. However, merry Christmas enjoyments and happy new year to American people...

Hubert Frappier
( new on the forum, not really new to radio. Sorry for the language errors: I had not learn English for 35 years! )
#2

Hubert , Nice job on thew radio regardless of what model it is ! You may already know of Nostalgia Air web site ? There are resourses there that may help you identify your model if no one here knows off hand .That is all I can offer as I have never seen a philco like yours before . Good Luck and have a good day !

Bill T

http://www.nostalgiaair.org/
#3

You can also use the tube socket layout diagrams in the TUBE MANUAL section of my site below to help identify your chassis.

It appears though, that you have a European model, as that dial face is not one that is seen on US Philcos from the mid 30's.

Bon Chance,

Chuck
#4

Hi!

So! I'm sure now my set isn't a original Philco one... Icon_sad
Certainly it has been transformed in the past by an anonymous owner or Europe fashioned (?) in a factory ...

It does not matter! I like my Philco such as it is...
I do like early and mid 30s Philco receivers, What beautys they are!
I hope I'll find another one . A nice hope and dream! Icon_smile
Thank you very much, Bill and Chuck for your answers.

Hubert Frappier




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM
Shadow Meter Bulb
Ross I am not sure what current limiting effect the incandescent provides. They are two different parts of the sch...morzh — 08:31 PM

[-]
Who's Online
There are currently 5278 online users. [Complete List]
» 1 Member(s) | 5277 Guest(s)
Avatar

>