Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Jackson Bell Question
#1

i got this JB from a co worker the other day it is a nice 6 tube superhet with 3-57's,a 56,33 output and an 80 rectifier tube anyone have an idea of the chassis model number thanks Don


Attached Files Image(s)
   
#2

The 33 is wrong, it's an 2 volt output tube for a battery radio, very likely it was supposed to have a 47 or a 2A5. Somebody probably grabbed a random tube with the same base just to fill an empty socket, or wasn't aware that a 2 volt battery tube was very different from a 2.5 volt AC tube.
Regards
Arran
#3

yup i haven't measured any voltages yet BUT the set has been playing that way since who knows when it was in used daily until a few years ago and plays now with very little ,or no hum!! (i would have thought a 2.5 volt tube would have poped) or HUMM with twice the normal filiment voltage Don
#4

Nice JB, but yeah, the tube line-up sounds wonky with that 33 in there. It'd be nice to see some pictures of the chassis. It might be a more common chassis used in a less common cabinet.

The cabinet doesn't look familiar, but JB was a small west coast company and undocumented models turn up now and then. Looking at the cabinet style makes me think it may have been one of their later (last) sets made. JB is usually pretty good about having the model number stamped on the chassis or engraved on a chassis plate.

I just did a quick scan of Floyd Paul's JB documentation and didn't see a cabinet like yours.

And for anyone who doesn't have a set I highly recommend Los Angeles Radio Manufacturing, The First Twenty Years by Floyd A. Paul. It's a very interesting look at the birthplace of the midget/mantel set:

http://www.antiqueradios.org/paul-bks.html

These have recently been reprinted in a limited edition after being out-of-print and unavailable for years.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread:
[-]
Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM

[-]
Who's Online
There are currently no members online.

>