Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I've got a 610! Schematic?
#1

Hi Pholks!

I'm brand new to the Phorum, and brand new to radios. I have been building tube guitar and some hi-fi amps for a few years.

I'm here because a friend gave me her Philco, a 610 as I just discovered (see pic), and I'm looking to do a bit of restoration. From the photos, you'll see that it's in pretty good shape, and that someone has done a partial recap at some point. I brought it up on the variac w/ light bulb limiter, and it works! I was able to tune in several AM stations.

I've been soaking up some info here, so I have some idea what I'm in for, rebuilding bakelite blocks and such. Alignment sounds scary, but I'll burn that bridge when I come to it. The question I have at the moment is, do I have the right schematic. This is the closest I've found. It almost matches my tube complement. I've got a 41 output tube, it shows a 42. Would that be a common production variation? Or maybe whoever worked on it before changed tube types? Any clues much appreciated.

I'm excited! My first old radio! Until a few days ago I couldn't have told you what a field coil was. What? There weren't always permanent magnets?? Icon_biggrin

John

[Image: http://grandpaslab.com/wp-content/upload..._front.jpg][Image: http://grandpaslab.com/wp-content/upload...430910.jpg][Image: http://grandpaslab.com/wp-content/upload...03/016.jpg]
[Image: http://grandpaslab.com/wp-content/upload...490200.jpg][Image: http://grandpaslab.com/wp-content/upload...03/015.jpg]
#2

Hi and welcome!

Yes, you have a 610B, and yes, the schematic you have is a 610 schematic.

The 610 underwent numerous circuit changes during production. In order to have all of these, I suggest you order the service pack for this set from Chuck - well worth the $7 cost.

http://www.philcorepairbench.com/

A 41 will substitute for a 42 in a pinch, but it's best to use the proper 42 tube. The characteristics of the two are not exactly alike, plus the 41 has lower output power.

--
Ron Ramirez
Ferdinand IN
#3

Thanks, Ron. I've placed my order with Chuck, and found what looks to be a good 42 for a reasonable price on eBay.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model #20
Hello again fellows , well I powered up the set this evening after I had changed every cap and resistor in this set and ...onlyrick — 09:34 PM
Zenith H725
Yes - better it happened on the repair bench than returning to the owner. The other question is - do I also dissect a...EdHolland — 09:08 PM
Zenith H725
That's a bummer but get them now. Paul BPaul Philco322 — 08:27 PM
Zenith H725
I completed the insulation on the cabinet interior (Al foil and hi temp silicone rubber), and reglued the speaker gasket...EdHolland — 06:18 PM
HiFi (Chifi) tube amp build - but my own design.
Tim - Photos of 8 octal tube sockets. (Top and bottom) Send me a PM if you're interested.RodB — 04:11 PM
VTVM meter moves when my hand is next to it & not on
Haha! I hope so. It seemed rather lost and forgotten languishing in the frozen Northeast of England.EdHolland — 02:36 PM
VTVM meter moves when my hand is next to it & not on
Ed - it's in the Cayman's enjoying the good life.RodB — 02:14 PM
VTVM meter moves when my hand is next to it & not on
Static electricity - but the other chaps beat me to it again. I've seen this before with analogue meters. I've also ...EdHolland — 01:56 PM
Need to purchase some accessories for restoration of my Old Philco Radio
Hi Paulo, Welcome to the Philco Phorum. I can see why you want to find good reproduction parts. That is a bea...MrFixr55 — 11:10 PM
HiFi (Chifi) tube amp build - but my own design.
Tim, I have some bakelite sockets in my work shop that I can dig up. I believe quite a few are NOS. I will take photo...RodB — 10:03 PM

[-]
Who's Online
There are currently 1200 online users. [Complete List]
» 6 Member(s) | 1194 Guest(s)
AvatarAvatarAvatarAvatar
AvatarAvatar

>