Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Broadcasting over a 48-464
#1

A fellow radio collector told me about a cheap AM transmitter that, despite being a child's toy, is quite effective for "broadcasting" music or old time radio shows to an antique radio (at 1610 on the dial) via the built in cassette tape deck on the unit or the audio jack that can be used for a CD player or iPod. It's called "Radio DJ" by Wild Planet. Supposedly it used to be sold at Toys-R-Us stores earlier in the decade, but examples can still be found on eBay for around $20. This is where I got mine. I tried it out today on my 1948 Philco 48-464 by broadcasting a song from an old Bing Crosby radio show. I'm impressed at how well it works! See for yourself: http://www.youtube.com/watch?v=YfmoqXF5CUI

Greg V.
West Bend, WI
Member WARCI.org
#2

I've used one of these for a few years now on my AM radios. A nice long wire antenna running vertically thru a plumbing chase covers the whole house. Used it last Halloween to receive an old cassette of Orson Welles "War of the Worlds" on my 37-630. Also used at Christmas with some 50 cent flea market Holiday cassettes. I like the adjustable built in microphone and sound effects. Still haven't figured out how to get both sides of a 3.5 mm stereo input from my i-pod to work with the built in mono input jack, although my old CD Walkman does have a stereo/mono switch. Use a matching 7.5 VDC? wall wart transformer connected thru battery terminals to replace AA battery power, since there is no power input jack on it.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM

[-]
Who's Online
There are currently 3015 online users. [Complete List]
» 2 Member(s) | 3013 Guest(s)
AvatarAvatar

>