Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help identifying this phonograph? E1764 or E1765 from 1957?
#1

We've found this in my wife's, Grandmothers attic after she passed. It looks to be in very good condition, so we're trying to decide if we should keep it or sell it. Part of that will be determining what it actually is Icon_smile

This is a picture that my wife just sent me to do some research on. Unfortunately she didn't look for a model number tag anywhere, but I'll do that when I get over there too. In the meantime, I thought maybe the experts could help out Icon_smile

If anyone can give an estimated value of something like this, that would be great too.


Attached Files Image(s)
   
#2

As a general observation of mine, sets of this era... how to put it politely? I suspect its sentimental value far surpasses the cash value you could get out of it under just about any circumstance. They aren't quite old enough to be considered "antique" yet, but if you find the right hipster...
#3

Ha, no sentimental value with it all, which is why I'm here asking about it Icon_smile

We may keep it an re-purpose the cabinet, I'm going to plug it in and see if it works tomorrow.
#4

HHHHHHHHIcon_exclaim That's, like,uh,un-jivey, man... another one, like,uh, headed down to the lower depths in the pit of despair. Man. Daddy-o. That's cruel... Icon_think Sorry. Couldn't resist. Icon_mrgreen But that does look to be in pristine shape (from the blurry photo)
#5

Does it have a radio in it as well or just the phonograph?
Regards
Arran
#6

J2K Wrote:I'm going to plug it in and see if it works tomorrow.

[Image: http://i326.photobucket.com/albums/k420/...g~original]

This is the worst thing you can do to a piece of vintage electronic equipment, because it is a big gamble. It may work...it may smoke...it may trip a breaker. Or it could even catch on fire.

Vintage electronics should be thoroughly checked by someone who knows what to look for (bad electrolytic capacitors which should always be replaced before applying power, any tar or wax seeping from power transformers) before power is applied.

http://www.philcoradio.com/tech/plugin.htm
http://www.antiqueradio.org/powerup.htm

But if you're determined to really plug it in and see what happens...all I can do is quote Clint Eastwood:

...You've gotta ask yourself a question. Do I feel lucky? ...Well, do ya, punk?

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Restore Code ??
I knew that Fluke was the Cadillac so with that in mind what Fluke would you recommend I get?dconant — 03:53 PM
Philco 91 Restore Code ??
Yep. 10W is probably enough. Also, if the meter measures Farads, then it should also have that "Delta" button...morzh — 02:38 PM
Philco 91 Restore Code ??
I measured the current through the resistor I am using as a replacement for the speaker field coil and got 40ma. So that...dconant — 02:32 PM
Philco 91 Restore Code ??
No I'm not saying I don't own a DMM. I have a CCC one (Thsinde 18+). I forgot that could read caps. I did purchase a Flu...dconant — 02:28 PM
Philco 91 Restore Code ??
Are you telling me you do not own any decent DMM, that can measure capacitances from a few pF and up? Even todays CCC (C...morzh — 01:44 PM
Restoring Philco 96
Well, selectivity today, with stations disappearing, is not such a problem for TRF as it likely used to be. Although wh...morzh — 01:42 PM
Philco 91 Restore Code ??
Mike I did that already and can't really get any kind of reading. My little Honeytek A6013L reads 0 on all scales. One s...dconant — 01:38 PM
New member
Well, to be frank, when it comes to radios, especially the older types, a person with no electronic background could be ...morzh — 01:33 PM
Restoring Philco 96
Thanks for mentioning the video you had uploaded. Somehow I missed that post. Just watched your video, and it sounds to ...jrblasde — 01:28 PM
Restoring Philco 96
Joseph well, for now we will have to get by the video I have made, as the final video would not be made before I get a ...morzh — 01:04 PM

[-]
Who's Online
There are currently no members online.

>