Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 2 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Pilot H220 Radio @ Flea Market
#16

That may be difficult, it the knobs it uses are of the ship's wheel style. If those are the correct knobs they were also used on a post war Pilot TV. The good news is that you can buy reproductions of that style of knob, but they are not exactly cheap.
Regards
Arran
#17

Thanks, Arran. It does have the "ship's wheel" style knob. The outer ones are correct. I will just need to find the 2 inside ones which my friend thinks he may have. We will see.

Craig R.
#18

http://www.renovatedradios.com/parts.html

About 2/3 down the page Pilot TV-37 Television Knobs (KPilotTV37)
#19

Thanks BrendaAnnD for the link! I will wait to get the radio back and compare the knobs. From the pics in the link it looks as if we may have a match (if my chassis expert doesn't have any in his collection). Thanks again. Much appreciated!

Craig R.
#20

What is interesting is that this set is an AC/DC set with a combination of tubes in series-filament and parallel filament configuration.
#21

I just picked up one of these Pilot H220 (Similar to Model 224)
I need Back Photo's and dimensions as mine is missing.
Radio Otherwise Complete. All Original Knobs. They are NOT the Ships Wheel Type as used on the TV.
E-Mail sent to original Poster

Bob T
Wilmington, NC
#22

Looks like an Airline model.
#23

Wow! A buddy in Wilmington just got a hold of the same set!!

If you want to see something interesting look at the schematic for this bear!

11 tubes plus ballast AC/DC set, FOUR 25L6 output tubes, and TWO 25Z6 rectifiers!

When you add up the total filament voltages, it is 180 volts, AND the 81973 ballast is rated at 47 volts at 300mA!!

Some serious parallel and series filament strings here!!!
#24

Ah.... just noticed my buddy made the entry a couple before me......

Just remember, kids. Work HARDER, not SMARTER !!!
#25

    [attachment=3819][attachment=3819]        

Just Acquired a Pilot H220 (Same as 224) I believe

All original except for missing Back.
Paid a LOT more than $45 though
Needs Recap , but is playing on Variac

Have contacted OP to get Photo of back and Dimensions.
Heavy HUGE Radio

Bob T




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Best to use the one from the library on this site, then when you refer to part 30 we know which part you are referring t...RodB — 03:32 PM
52-942
Welcome to the Phorum, Ken! The included schematic for your set is located in the Philco Library at the bottom of our Ho...GarySP — 03:13 PM
Video Source for Predicta
You can also source a used VCR and use that as a modulator to feed your DVD source into.TV MAN — 02:57 PM
52-942
Just received my 52-942. Its a handsome set. When I opened the back to examine it I noticed there are not connecting wir...Ken Arroyo — 02:54 PM
Philco 42-345 Restoration/Repair
"Your radio tubes get these voltages from the power transformer secondary windings. The A voltage is supplied by th...osanders0311 — 01:40 PM
Philco 42-345 Restoration/Repair
Please correct me if I am wrong, while working on this radio I noticed under the chassis where the bottom of the tubes p...osanders0311 — 01:28 PM
Philco 42-345 Restoration/Repair
"BTW there's a 2.2k resistor from B+ to one of the XXL tubes so you have to identify those resistors before you rep...osanders0311 — 01:04 PM
Philco 42-345 Restoration/Repair
BTW there's a 2.2k resistor from B+ to one of the XXL tubes so you have to identify those resistors before you replace t...RodB — 11:08 AM
Philco 42-345 Restoration/Repair
Okey dokey, let's get on the wayback machine. Back when radios were running on batteries, they were powered by three DC ...RodB — 10:34 AM
Philco 46-1209 strange behavior
Meter is a DMM (Brymen BM-257 to be exact) Voltage being measured to the chassis Yep, just double-checked 'emsq65 — 10:22 AM

[-]
Who's Online
There are currently no members online.

>