Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Nice little 37-52 and Other goodies today !!!
#1

Got this 37-52 from a Retiring Antique shop in the middle of nowhere !!
Then he shows me this Westinghouse "Little Jewel"
and the Emerson 520 Catalin !!!!

The AK 356 I got earlier in the day !!
So many radios lately, I LOVE IT !!
Rock


Attached Files Image(s)
                   
#2

Oh wow, great haul! Those look fantastic!

Is the 'Little Jewel' tubed or solid state? Really classy look.
#3

Skyscraper, I have not opened it up yet, but I do believe it is tube !!
#4

The Westinghouse Little Jewel should be tube. I have one that needs gone through again and it is a five or six tube unit if memory serves. Looks like yours ended up with TV control knobs on it. Good haul all around though! Icon_biggrin

No matter where you go, there you are.
#5

Little Jewel knobs are common.

Keep up the great work unearthing some nice sets, John!!!

I think your AK collection is better than when I used to specialize in them. .
#6

As you know I got a lot of knobs, I'll look through them to see if any match but I don't remember any thick knobs or if you like any just PM me and Ill send them to you. Lets see $100 divided by 269... you owe me .10 cents each, Icon_lol you pay shipping though Icon_mrgreen

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#7

Just so you know what knobs to look for...here's mine.


Attached Files Image(s)
   
#8

The little Jewel is a nice little. It was advertised as the little set that sounds like a console. 6 tube w/o a rf amp. The extra tube is to increase the audio gain as it has a negative feedback loop. This is what makes it sound like console.
Common issues bad speaker(rubbing v.c.) It's mounted next to the two hottest tubes in the set.
Warped dial. Some hot water and a flat surface will help you get it back in shape.
And all of the other common issues that old sets have. Working properly it sounds like the Bose Wave radio of it's day!

I've made some knobs for them using bondo and a bic pen. worked well.
Nice hall!!!!
Terry




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently no members online.

>