New member and owner of a model 46-1203
Posts: 2
Threads: 1
Joined: Jun 2014
City: USA, TN
Hello, New member here and proud PHILCO owner. I picked up a working model 46-1203 Phongraph/radio combo at a flea market recently. It came with a matching table. I do have to admit that I was not completely convenced it went with the unit. I looked it over and the tables finish did seem to match the radio's cabinet very closely. Then I found the same PHILCO logo/name branded on the front in small letters. I have searched the Internet and failed to see this exact pairing anywhere else? Were the tables offered seperately? Was this optional?? Any input would be greatly appreciated! Also, I would like to know the size and type bulb for the radio dial. It didn't come with one in the socket.. I have nothing to go by??Thanks in advance for any info you can give!
Posts: 5,088
Threads: 270
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Welcome to the Phorum! I can't answer your question but others might be able to. If you post a couple pictures it might help. See this link on how to post some pics http://philcoradio.com/phorum/showthread.php?tid=29 .
Posts: 2
Threads: 1
Joined: Jun 2014
City: USA, TN
Thanks for the reply and info!
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
There were Philco tables made, but unsure of the dates made.
Ron is the furniture EXPERT here.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
[Video: http://www.youtube.com/watch?v=FpOYuCn95dY]
Tom, you're too kind. Thanks.
Nitehawk - can you please post a picture, or pictures, of the table in question?
I will try to look this up over the weekend; it will help a great deal if I have a photo or two to go by.
--
Ron Ramirez
Ferdinand IN
Posts: 1,523
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
I might be able to shed some light on this. In my Philco week newspaper insert, celebrating the production of the 20 millionth Philco, for the week of October 27- November 3, 1947, Philco offered this Walnut Phonograph Table, a $22.50 value for free with the purchase of a model 48-1256 radio / phono combo. The 48-1256 is the same as the 46-1203, so I suspect they offered this same table the previous year as well. I've seen them in pictures, and they do have the gold foil PHILCO decal across the front edge. Here are a couple of scans from the newspaper (apologies as it is too big for my scanner bed).
Greg V.
West Bend, WI
Member WARCI.org
Posts: 152
Threads: 11
Joined: Feb 2013
City: Dallas, TX
wow.. that was a pricy unit!
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Greg
Bingo! That is the very table I was thinking of...I've seen those tables on eBay occasionally, and I wondered what they would have went with...now I know.  Thanks for chiming in and posting the ad. 
I'll still look in Philco Furniture History, but I seem to recall that the only tables in there are a couple of Baby Grand tables made concurrently with Model 20.
--
Ron Ramirez
Ferdinand IN
Posts: 1,523
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
No problem, Ron. Glad it was of use. Incidentally, the same "free" table was also offered for those who purchased a 48-482 during "Philco Week".
Greg V.
West Bend, WI
Member WARCI.org
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I finally remembered to go downstairs and look in Philco Furniture History. The table isn't mentioned. So, I guess all we know about it is from the ads Greg V. mentioned.
--
Ron Ramirez
Ferdinand IN
Posts: 1,523
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
Too bad we haven't heard back from Nitehawk to confirm that this is the table they indeed have.
Greg V.
West Bend, WI
Member WARCI.org
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
New Philco Repair Bench
|
| I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM |
|
Made mistake & did not label connection
|
| It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires.
Why'n't you...morzh — 09:49 PM |
|
Made mistake & did not label connection
|
| I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM |
|
Made mistake & did not label connection
|
| You'll have to forgive me, I am not sure what you mean. Can you explain what you are really saying. If anyone does not...georgetownjohn — 08:05 PM |
|
Made mistake & did not label connection
|
| Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM |
|
Made mistake & did not label connection
|
| Maybe this is starting to make some sense in my hard head. Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM |
|
Made mistake & did not label connection
|
| I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM |
|
Made mistake & did not label connection
|
| What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM |
|
Made mistake & did not label connection
|
| Hello John,
I have been there either label got lost or was not labeled !
Sincerely Richardradiorich — 02:15 PM |
|
Made mistake & did not label connection
|
| Sorry, it is a Philco 37-640. Does that help?--Johngeorgetownjohn — 02:14 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
