Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Speaker repair
#1

Part of my 16B 11"speaker's back is covered with a some sort of gauze material, and, needless to say, had a better days.What is the purpose of it? Is it for the audio base improvement? How important is it and what kind of material one should use for replacement? Thanks.
#2

If you mean this cobweb style on top openings, I think it is simply to prevent dust accumuation. Radio is oen (unlike close speakers today) and dust fall from above.
#3

Some manufacturers made it a practice to add screening or gauze material to the speaker basket area behind the cone. This kept debris out of the back side of the speaker and gave some degree of protection to the speaker cone along with the front grill cloth. Hopefully people would not make a practice of poking around inside their radios. Unfortunately many early radios had no back cover at all.

There were very few speaker arrangements that incorporated any sort of enclosure in the early years of radio. The appearance of Altec speaker/enclosure combinations for theater sound systems were an early example of bass reflex enclosures. You can do an internet search on loudspeakers and find a wealth of information on the subject.

Joe
KC5LY
#4

Joeztech,

I see your point. However, not only on my set, but on many others the gauze covers only 1/2 of the basket and only the right side of it looking from the back, having the left one open(?)
#5

Fields100, the speaker is mounted in the cabinet wrong, the gauze was meant to be on the top, not to the left or right, to prevent dust and debris from settling into the voice coil.

Gregb
#6

Gregb

All respectable sites on the web to name a few show the gauze on the right side looking from the back.I agree with you, it is only one logical way for it's location and, honestly, I would not feel bad putting it on the top, on the bottom or just omit it whatsoever, there are other things more important to be concerned about. It just very curious. There must have been the reason for it.
Thanks.
#7

Well maybe I am mistaken, but it seems logical that it would be on the top. Maybe Ron might know one way or the other.

Gregb




Users browsing this thread:
[-]
Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM

[-]
Who's Online
There are currently 2330 online users. [Complete List]
» 1 Member(s) | 2329 Guest(s)
Avatar

>