Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 59c Cabinet Restoration
#1

Here's a summary of the restoration done on a 59c cabinet.

As received:
[Image: https://www.dropbox.com/s/7wwjji0sb2p19n....jpg?raw=1]
and
[Image: https://www.dropbox.com/s/7cs2wsu3ttmyl7....jpg?raw=1]

Stripped:
[Image: https://www.dropbox.com/s/g6idavdzvh64vi....jpg?raw=1]

Toned and a couple lacquer coats:
[Image: https://www.dropbox.com/s/8i9zhcf9mqioan....jpg?raw=1]

Decal on...almost done:
[Image: https://www.dropbox.com/s/2bh5ehrc6pe4nz....jpg?raw=1]

Done and on the shelf (the grill cloth shows a bit too green in this particular light but in reality has a more golden tone to it...its from Kenneth Richmonds offerings):
[Image: https://www.dropbox.com/s/tj386dw99d9l78....jpg?raw=1]
#2

Shiny!

Icon_thumbup

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

Think that's good or bad?
#4

I think it looks great Bob, keep up the good work.

Gregb
#5

Don't get the big head <wink>, but Paul Sanders does what I consider one of the better refinishing jobs around and yours looks pretty close to his:

http://www.paulsandersclassicradios.com/...ntle-radio

Nice work on a neat little set!

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#6

Good OR BAD?

I think my little thumbs up says it all, Icon_lol

I say, the shinier the better!

Ok well, not always, My bald spot is shiny and I don't like that but for radio finishes I like them original or like the day it was put on the store shelf.

A+ job

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#7

Thanks for the comments guys. I keep learning from each one of these I work on and a lot of that is from this Phorums comments and threads or conversations with Phorum members. Have to get back to the 39-25 that needs attention.
#8

wow I like it Icon_thumbup Icon_clap




Users browsing this thread:
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently 2819 online users. [Complete List]
» 2 Member(s) | 2817 Guest(s)
AvatarAvatar

>