Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

37-690
#1

Well I ended up getting this set the other day from a friend of mine. Front and sides of cabinet may be saved but the top needs refinishing. Behind front doors is very,very nice. Needs a couple resonators as these are missing the rear supports but I have extras I can use in it.

I think this will be sitting for quite a while before I can work on it.

 


Attached Files Image(s)
       
#2

Here's a pic of the rear...

Pretty clean overall.


Attached Files Image(s)
   
#3

Looks like a great acquisition.
#4

A great find. Well worth restoring. I just got mine back from a nice fellow who tuned mine up for me.
Wonderful high quality cabinet construction and veneers.
#5

Chassis is very clean.
#6

Thanks everyone for the replies...
The price was right so I decided to buy it. This guy finds some really nice radios and usually flips them within a week or so at a good price.
#7

(12-03-2014, 08:44 PM)thirtiesradio Wrote:  Thanks everyone for the replies...
The price was right so I decided to buy it. This guy finds some really nice radios and usually flips them within a week or so at a good price.

So lucky! I am GREEN with envy! Icon_mrgreen
#8

(12-05-2014, 01:45 AM)palegreenthumb Wrote:  
(12-03-2014, 08:44 PM)thirtiesradio Wrote:  Thanks everyone for the replies...
The price was right so I decided to buy it. This guy finds some really nice radios and usually flips them within a week or so at a good price.

So lucky!  I am GREEN with envy!   Icon_mrgreen

Thank you. I really like the 690 series.
#9

(12-05-2014, 10:06 PM)thirtiesradio Wrote:  
(12-05-2014, 01:45 AM)palegreenthumb Wrote:  
(12-03-2014, 08:44 PM)thirtiesradio Wrote:  Thanks everyone for the replies...
The price was right so I decided to buy it. This guy finds some really nice radios and usually flips them within a week or so at a good price.

So lucky!  I am GREEN with envy!   Icon_mrgreen

Thank you. I really like the 690 series.

Nice!  Looks suspiciously like the one the guy was selling when I bought the 37-116 Icon_think .  If it's the same one, it was buried behind a lot of things in his garage.  Must of been a bear getting it out.  Very heavy radio.

- Geoff
#10

(12-09-2014, 01:20 AM)Geoff Wrote:  Nice!  Looks suspiciously like the one the guy was selling when I bought the 37-116 Icon_think .  If it's the same one, it was buried behind a lot of things in his garage.  Must of been a bear getting it out.  Very heavy radio.

- Geoff

Yes, this is the same set Geoff. He said you had been out just before me to get your 37-116.

It took both of us to lift it through all the stuff in his garage and then we hand-trucked it the rest of the way. Had to leave it in the SUV overnight because of the rain. He didn't have this very long. I was just out there a few weeks back and bought the complete insides for a 37-690 in near mint condition and he said he bought this soon after.

I think we both got nice sets Icon_biggrin  
#11

Wow! I guess thats what friend are for. LOL . Good luck with your great new set!
#12

(12-09-2014, 08:55 AM)PhilcoJohn Wrote:  Wow! I guess thats what friend are for. LOL . Good luck with your great new set!

Your right about that Icon_biggrin  Thanks John




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently no members online.

>