Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Parasitics in 89B Receiver
#1

I have the 89B 123 with the 77 detector.  I had to rewind the oscillator coil as in many other sets and all is working and about to package it up and call it fixed when lo and behold I find a parasitic.  The set is self oscillation on 600 khz and there is a station in this market on that channel.  So out come the bypass cap and see if I can place it across something that will stop the parasitic.  Just wonder if any others have seen this.

Stan Adams
Memphis Icon_e_surprised  Icon_e_surprised

Edit: Model number corrected.
#2

Maybe a few drops of Frontline or Advantage, take care of those nasty critters. Icon_lol

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#3

yea buddy, if you have ever spent a night in a cold transmitter building trying to get birdies out of a broadcast transmitter, now that is some fun!!! Napalm might work better.
#4

Hi Stan
Couldn't find any info on your set unless it is a battery job??
Terry
#5

89B is 34 Tombstone, I had birdies in the first RF Amp-1st Detector/Mixer, just backed the gain down a bit.
#6

Methinks you mean a model 19. Well you could have taken it to France to be with all to other Parisasites.
GL OM
Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently 3959 online users. [Complete List]
» 1 Member(s) | 3958 Guest(s)
Avatar

>