I finally found a good one!
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Everytime I find one of these it has cracked veneer on the top curved portion, this one is ok. I've wanted one for several years. This was on CL for 3 hours when I saw it stting in my in-laws in Queens tonight. Kirk, it wasn't far from you in Belmore. I flew over and paid $60 for it. Now to get it home. One thing I noticed on this and all the others I saw was the top gets loose and if you try to pick it up it will come off and crack the curved portion of the veneer. I'll bring some glue and clamps next time I visit to bring it home.
It is missing a clarifier and the dial and glass. I have two parts chassis and a broken cabinet with those parts in tact.
Steve
[Image: http://i1033.photobucket.com/albums/a414...75ed19.jpg]
Posts: 2,575
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
steve
nice find and steal
I`ll be over to pick up don`t tell mike 
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
(01-17-2015, 10:51 PM)sam Wrote: steve
nice find and steal
I`ll be over to pick up don`t tell mike
sam
I have to hide it now!
Posts: 16,577
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I have one, I do not need another one.....but nice buy nevertheless.
Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Thanks John. It seems there are still a lot of them out there, just never close to me until now.
Posts: 2,575
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
 I know where their is a nice old corvette
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
(01-20-2015, 08:34 PM)sam Wrote: I know where their is a nice old corvette
Now I have to hide that too!
Posts: 2,575
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Come on share your toys 
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
If you help me put it back together maybe. It is in a least 100 pieces right now.
Posts: 344
Threads: 38
Joined: Jun 2011
City: Tustin
State, Province, Country: California
Nice radio! $60 is a steal 
Posts: 496
Threads: 15
Joined: Mar 2013
City: Weymouth Ma
(01-17-2015, 10:19 PM)SteveJB Wrote: Everytime I find one of these it has cracked veneer on the top curved portion, this one is ok. I've wanted one for several years. This was on CL for 3 hours when I saw it stting in my in-laws in Queens tonight. Kirk, it wasn't far from you in Belmore. I flew over and paid $60 for it. Now to get it home. One thing I noticed on this and all the others I saw was the top gets loose and if you try to pick it up it will come off and crack the curved portion of the veneer.
That's how I got mine. The previous owner picked it up by the top and just about pulled it off. The front is cracked and you could probably lift it off with out too much effort. It was good to get at the time but I don't see getting to it soon. Good luck with yours.
Henry
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Thanks Henry, the curved veneer is very hard to repair. I will use my other one as a parts set to fix this one.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Restoration of the Canadian General Electric A-87
|
| Ok.... In the fourth year of the war, I still decided to return to an active hobby. For more than three years, I did not...RadioSvit — 10:43 AM |
|
Philco 37-116 Cabinet Repair
|
| You'll probably have to get quite a large amount of wax filler, those are some big gaps, and both sides. Nice summer pr...RodB — 10:38 AM |
|
Philco 37-116 Cabinet Repair
|
| Hello everyone. I completely agree with Richard and Dan - in this case, without replacing the veneer, only a wax filler ...RadioSvit — 10:07 AM |
|
Philco 37-116 Cabinet Repair
|
| I have used Timber Mate
Timber mate is a grain filler . You can get it in different colors,so it will be close to...Dan Walker — 09:51 AM |
|
Help with Supreme 599
|
| The 300 ohm line adjustment is used to set the primary of the transformer to a nominal voltage for any line voltage from...DaleHCook — 09:22 AM |
|
Philco 37-116 Cabinet Repair
|
| I think Arran is correct about the substrate expansion. I'm going to give the colored wax a try.dconant — 08:11 AM |
|
Philco 37-116 Cabinet Repair
|
| Hello Guys,
What I would do is get colors of wax filler and fill in the void !
Sincerely Richardradiorich — 12:41 AM |
|
Philco 37-116 Cabinet Repair
|
| It looks to me like the structure under the veneer may have expanded from humidity cracking the veneer on the surface. W...Arran — 09:42 PM |
|
Help with Supreme 599
|
| Iam only getting 4vac out of the tranny
For the 80 filament. The line rheostat
Looks fine and the tranny is getting 11...daveone23 — 08:45 PM |
|
Rogers Majestic R-646
|
| Transformers rewind?
It's very easy!
If you don't have round eyes 8-)
Vlad95 — 01:55 PM |
|
Who's Online
|
There are currently 986 online users. [Complete List]
» 2 Member(s) | 984 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
