Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What should I do here?
#1

Ok so you all know I got that 45 butterfly and rebuilt it. Mike did my chassis and she looks good and plays great.

I recently came into another 45 cabinet only. It is complete and just needs a new finish. The one I restored had nothing salvageable but the top molding from the top, Front was dead except for the veneer but I had a good bottom good grill cloth, and ok sides.

The only issue as I found out now from looking at the new cabinet is that someone cut the bottom front molding of my rebuilt one flat and it should have a 45 degree angle to the floor. 

My dilemma is this, do I take my chassis and put it on the new cabinet or leave it in  the one I already re-did?

The original one is a half new cabinet so I think something all original would be better and I could sell or trade the rebuilt cabinet.

What do you guys think?

Keep the old rebuilt?
Go with the all original?

Kirk


Attached Files Image(s)
                   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

Keep the cabinet that you like the best...

I typically prefer all original, but have kept a couple of cabinets I have redone because they turned out nice and I had a personal attachment to them.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

Hmmmmmm,

I do have a little attachment but I, like you love original.....

If I could make the choice I would ask here Icon_lol

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

kirk
keep all original one
sell other at ktown
sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#5

Think anyone will have interest in a half new cabinet?

Hmmm, $10.00 in wood and veneer, $25.00 for the cabinet and $500.00 in labor Icon_lol

Oh and dont forget it fell off the table after photographing it so it has a little dent and a few chips... Icon_rolleyes

Anyone interested, Icon_lol

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#6

I would keep the one that you spent all the time to recreate intact.  After all, that is something to be proud of.  Put the other cabinet on the shelf for the time being until another chassis comes along or you get a good deal on a parts radio.  Then make another nice radio out of the two.  Once finished, keep them both or sell the one that you have the least attachment to.  Just my thoughts.

Craig R.
#7

Original, to me .. is always nice.
#8

I think I once saw a chassis of a 45 sold on its own.
You might be able to put together one more 45 and those go for a pretty penny.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#9

Others have suggested that you keep the cabinet that you like the best...and I agree.

Model 45 and model 28 (the AC/DC version) come up for sale every so often. Keep an eye out for one, and then you can let go of the complete set that you like the least.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Testing a speaker and output transformer Trutone A2-G
Hello murf! I merged the threads. Please do not start new threads regarding the same radio. Take care, - GaryGarySP — 10:21 PM
Philco 42-345 Restoration/Repair
Regarding picture 5 on page 1 of this thread this capacitor is #40 on scematics diagram - 4mF+4mF. Black wire is "-...Vlad95 — 09:01 PM
Philco 42-345 Restoration/Repair
That's a dual 4 MFD, red and green are both 4mfd and black is common negative. You should be able to see them in the pow...RodB — 08:58 PM
Philco 42-345 Restoration/Repair
Can anyone help me figure out a capacitor that has 3 wires coming out of it red and green on one side and a black wire o...osanders0311 — 08:14 PM
Two small radios from France. Restoration and review.
Greetings; I think that it's possible that the assortment of components was the result of post war parts shortages, a...Arran — 12:18 PM
Philco model 38 code 121 not receiving signal.
Unfortunately I can't inject any audio into the volume control. It is in the primary circuit of the antenna coil, not in...Stormlord5500 — 09:32 AM
Philco model 38 code 121 not receiving signal.
Sounds good Gary I'll do that. I have plenty of stuff like that I can scrounge up. I am still kind of new to all this so...Stormlord5500 — 08:47 AM
Philco Battery-WWII vintage
Seems to me that this a general purpose or radio filament 6V battery of very high amp-hour capacity and very high "...MrFixr55 — 08:08 AM
Philco model 38 code 121 not receiving signal.
You should be able to inject an audio signal such as from a CD or mP3into the radio at the volume control. The set will...MrFixr55 — 08:14 PM
Testing a speaker and output transformer Trutone A2-G
Hello guy's, Have a Trutone A2-G teledial floor model radio that I am having issues with. Suspecting maybe speaker or ...murf — 03:25 PM

[-]
Who's Online
There are currently 300 online users. [Complete List]
» 1 Member(s) | 299 Guest(s)
Avatar

>