Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My Latest Project a Graymark 512
#1

When we moved to Texas I found this transistor radio in the bottom of a drawer hidden away for years.

A little history of the radio. If I recall correctly, I built this radio in A&P school in Pittsburgh PA. around the Summer of 1972. I believe it was a required project for the electronics course. As time goes by it was put away and forgotten.

Well lately I’ve been interested in restoring old tube radios now that I’m retired. I’m building a control line stunter and I have a little time between coats of paint. I remembered the radio and I opened it up and put in fresh batteries. Turned it on all I heard was static. Then I looked for the electrolytic caps which usually go bad after awhile. I ordered some new ones from Digi-Key and installed the 5 caps tonight. Turned it on and it plays, very loudly too!

I then cleaned it up using Scrubbing bubbles and took some pictures. It is so cool to hear that thing playing again after what 40 years!

[Image: http://i1060.photobucket.com/albums/t458...9abng7.jpg]

[Image: http://i1060.photobucket.com/albums/t458...jyabnq.jpg]

[Image: http://i1060.photobucket.com/albums/t458...dq2eu0.jpg]

[Image: http://i1060.photobucket.com/albums/t458...chtxov.jpg]

Crist
#2

Very nice, can hardly tell it was repaired except that it is clean now. Lol

I am not into transistor radios but I did get one recently that I really like.

My library is themed for secret compartments. Saw this secret hidden radio in a book and bought it instantly. Cover says radio time, it is leatherette and even has a clock in it! We know how I love clock radios. : mrgreen:

Kirk


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM
Made mistake & did not label connection
Maybe this is starting to make some sense in my hard head.  Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM
Made mistake & did not label connection
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM
Made mistake & did not label connection
Hello John, I have been there either label got lost or was not labeled ! Sincerely Richardradiorich — 02:15 PM
Made mistake & did not label connection
Sorry, it is a Philco 37-640.  Does that help?--Johngeorgetownjohn — 02:14 PM

[-]
Who's Online
There are currently no members online.

>