Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I made about $80.00, spent $20.00, It was ok but it was Easter so turnout was a little weak. Next one is right before K-Town so I dont think I am gonna go. The old guys are CHEAP!
It is at a Train station in Seaford every first sunday of the month.
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
There is nothing wrong with the 44/144 sets, although many overlook them because they are "only" a six tube set.
I believe Philco came up with a winner with these models. A good one will really pull in the stations, especially SW.
Posts: 4,912
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
I think that I would sooner keep a model 44 then a model 89, the model 89s are much more common, and they have a crappy autodyne oscillator circuit, and only have two bands at most.
Regards
Arran
Posts: 3,163
Threads: 59
Joined: Apr 2011
City: Lexington, KY
Another vote on the 44 over an 89.....
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
If it was in better condition I would.
Its Rons problem now, hehe
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Whaddya mean, my problem now???
Actually, if the picture in the first post of this thread is any indication, that cabinet is repairable. The chassis would not be a problem - and I have a spare chassis.
So, Kirk - yes, I'll take it. Thanks!  (I think.)
--
Ron Ramirez
Ferdinand IN
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Repairable yes but too much work for me. I dont love it so I would not want to put the time into restoring it.
Hence "your problem now"
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Come on Kirk, what do you mean you don't want to put the time in to restore it? Look at it this way, you won't have to buy more radios! This will keep you busy. Sorry brain fart, no, you will keep buying!
A friend in need is a pest! Bill Slee ca 1970.
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
nope, no buying unless is is something special. A Halson and such.
I passed her on to Ron so it has a good home.
kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Yes, the 44B, Debbie, and I made it home safely...I will give the 44B a good home...many thanks to Kirk, I really appreciate it.
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
1949 Motorola 5A9M
|
It looks like all the resistors except one are OK. Arran mentioned replacing the sand 150 ohm resistor and mine looks l...klondike98 — 02:25 PM |
New find. 91X code 225
|
Yeah the 121/221 documentation was correct for the RF end of the radio. It left me scratching my head when I was looking...pdieten — 11:59 AM |
philco predicta
|
Hi CGL,
Yes, troubleshoot the 140V Power supply, something is definitely loading it down, and since this supply excl...MrFixr55 — 07:32 AM |
1934 American Bosch 440T restore on YouTube
|
Looking forward to Part 2.Jimradio — 07:30 AM |
1949 Motorola 5A9M
|
Yeah, looks really dense. It is amazing how many sets of brand A were made by Brand B. I have Mid 50s RCA that is an e...MrFixr55 — 10:15 PM |
Philco 60 Power Trans
|
I am not 100% sure of the reason, likely due to the depth of the winding, but on HV windings of a power transformer and ...MrFixr55 — 10:04 PM |
46-1213 Schematic Question
|
Hi Larry,
Great idea on the fuse! Place in the line at the power switch. Best between the cord and switch. While ...MrFixr55 — 09:59 PM |
Philco 47-205
|
Just picked up the second of the three Leatherette Philco's. (My second one in the three-radio series) Nice shape, all p...slford310 — 09:18 PM |
Philco 60 Power Trans
|
Dan;
I take it that you mean that the H.V winding reads 157 ohms on one side of the center tap, and 177 ohms on the o...Arran — 07:00 PM |
New find. 91X code 225
|
Hello,
I have a Philco 91 code 121 (one speaker). I found more info here that might be of some help. Might want to fo...dconant — 06:42 PM |
Who's Online
|
There are currently no members online. |
|

|