Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

116-122 Grille Cloth
#1

I saw a post on ARF about a guy asking what grille cloth to use for his Philco. It looked like he needed the same stuff that I will need on my 116X or 116-122 restoration project. I've included some pictures of the cabinet and a small pice of the cloth that i cut from one on the clairfiers. RD doesn't look like they have a match, matter-of-fact theirs looks like just the opposite colors that I need. Radio Daze has their cloth #41 that's close. So what cloth is out there I can use? Thanks guys.

[Image: http://i1060.photobucket.com/albums/t458...qsz94u.jpg]

[Image: http://i1060.photobucket.com/albums/t458...zzcstx.jpg]

Crist
#2

(08-27-2015, 07:29 PM)Crist Rigotti Wrote:  I saw a post on ARF about a guy asking what grille cloth to use for his Philco.  It looked like he needed the same stuff that I will need on my 116X or 116-122 restoration project.  I've included some pictures of the cabinet and a small pice of the cloth that i cut from one on the clairfiers.  RD doesn't look like they have a match, matter-of-fact theirs looks like just the opposite colors that I need.  Radio Daze has their cloth #41 that's close.  So what cloth is out there I can use?  Thanks guys.

[Image: http://i1060.photobucket.com/albums/t458...qsz94u.jpg]

[Image: http://i1060.photobucket.com/albums/t458...zzcstx.jpg]

I prefer the cloth from radio daze better, ether one is good and that's  all the choices you have son Icon_wave Icon_biggrin Icon_eek Icon_shh Be sure and order some the 2 sides Icon_eek Icon_eek
#3

Well I ordered the cloth from RD and I'm starting work on the cabinet. Not real happy with the RD cloth. I like the other cloth RD offers but it looks like the colors have been reversed.

What are people using these days?

The last picture shows how much this cloth has faded.

[Image: http://i1060.photobucket.com/albums/t458...hyzcam.jpg]

[Image: http://i1060.photobucket.com/albums/t458...fjwuvh.jpg]

[Image: http://i1060.photobucket.com/albums/t458...vp5k1w.jpg]

[Image: http://i1060.photobucket.com/albums/t458...1gxznn.jpg]

Crist
#4

(10-16-2015, 09:08 PM)Crist Rigotti Wrote:  [Image: http://i1060.photobucket.com/albums/t458...fjwuvh.jpg]

That is 1938 Philco chevron cloth; entirely wrong for 1935-37 Philco sets.

If you order from Radio Daze, you want #03 (GRC03), not #41 (GRC41).

If you order from Kenny, you want the Philco Chevron cloth.

--
Ron Ramirez
Ferdinand IN
#5

OK, I thought so. I'll return the stuff and get the GC-03 stuff.

Thanks.

Crist
#6

Thats the stuff I used on my 38-116xx or close to it


Attached Files Image(s)
       




Users browsing this thread:
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>