Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

41-250 Cabinet Graphics & Refinishing
#1

I haven’t completely finished the 41-250 cabinet due to lack of a reproduction escutcheon.  Until I find a good one, I’ll make-do with a shrunken original which I managed to flatten out somewhat.  In the meantime, in the hopes of contributing something to this forum, I’ve posted some of my reproduction graphics.  This is a small image of the cabinet stickers and chassis model stamp and a link to the high-resolution image:


[Image: https://farm2.staticflickr.com/1645/2492...03e7_z.jpg]

https://flic.kr/p/DYaf6D


Notably, I’ve reproduced the fonts/typefaces used for the station tabs (call tabs) and made a graphic tool which can be used to make good facsimiles of any of the original tabs.  Here’s small image and a link to the high-resolution image:

[Image: https://farm2.staticflickr.com/1706/2490...6737_z.jpg]

https://flic.kr/p/DWoe8J

The preceding two images (click the left arrow) show the same tool with variations of the text color.

This is a link to an album with 18 images showing my methods for reproduction of graphics and a little experimentation with making water-slide decals.

https://flic.kr/s/aHskvBxH1i

I’ll post the cabinet refinishing later.
#2

They look beautiful
Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

That metal tape is ingenious!

Icon_clap Icon_clap

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

I think you have a typo there, OldRestorer. The word is spelled "ingeneus."
#5

Not sure I follow. There is no word ingeneus.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#6

Look at what Old Restorer puts under his name at the top left of his post. Your dictionary must not have a sense of humor.
#7

I hate to rain on your parade, but...

Winky Dink, your graphics look great...however, the font for the call letter tabs is incorrect. You really should use the font which you may download here, from the Phorum:
http://www.philcoradio.com/phorum/showth...p?tid=5148

--
Ron Ramirez
Ferdinand IN
#8

Ron, thanks for pointing out the Alternate Gothic font.  If I’d started with that, I could have produced a better product in half the time.

I shouldn’t have referred to my work as a “font.”  Each character is individually created by modifying existing fonts, tracing images of the original printing, and artistic drawing.  Irregularities are added to straight edges, corners are rounded, and symmetry is slightly disrupted to simulate the appearance of the original printing.  Here’s a comparison of the original tabs, my simulation, and the correct font:

[Image: https://farm2.staticflickr.com/1583/2590...84ca_z.jpg]

The issue is a matter of taste rather than opinion.  Using the correct font is authentic, but I’d rather make it LOOK authentic.  Here it is with set turned on in a dark room:

[Image: https://farm2.staticflickr.com/1552/2491...fd3a_z.jpg


I continually see small errors in my work that I’d like to correct, but until tonight I hadn’t noticed one GLARING error--I did “On-Off” instead of “Off-On.”




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 96 cabinet veneer
I can't figure out what the first step is, let alone the final step. I have tried copying pictures from my hard drive a...TGLager — 01:40 PM
Philco 38-2 Low Volume
I managed to get some more time on this. Hi Mr. FixIT, The radio has been recapped. Many of the resistors were rep...dconant — 01:39 PM
Philco 38-2 Low Volume
Thanks guys for the help. I started looking at these points but I have to quit for the day. I will be looking into this ...dconant — 12:23 PM
RCA WV-98c
Check out this crazy zero pot operation. Touching it drives it crazy. Its rubber tipped. Also the 6al5 has no negative v...daveone23 — 12:08 PM
Philco 38-2 Low Volume
If you check all of that and still have a problem (my first inkling would be one of the 6F6s) then look at the 6J5 phase...RodB — 10:44 AM
RCA WV-98c
Those will probably depend on teh switch combination. Could you list some that you see, their values and what they sh...morzh — 10:26 AM
Model 96 cabinet veneer
You are probably skipping the final step. Once you select the photos you want and they get downloaded, the system assign...RodB — 09:36 AM
RCA WV-98c
At this point, there is no input, just internal voltages Which are incorrect and not sure what they should be.daveone23 — 09:15 AM
Philco 38-2 Low Volume
Hi DConat, Generally, the lower the plate voltage the less negative the grid voltage has to be. Since the plates an...MrFixr55 — 09:27 PM
RCA WV-98c
If I had it in front of me, I would triy to trace the signal on one of the non-working functions. Try to trace and high...morzh — 08:21 PM

[-]
Who's Online
There are currently 1224 online users. [Complete List]
» 1 Member(s) | 1223 Guest(s)
Avatar

>