Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Hi all
Does anyone have any info on the operation of the disk recording on the 41-42 Philco sets with the recording unit. What I want is operation instrucion of the unit not the tech part.
Joe
Joe Bratcher near Louisville, KY
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Morning Joe,
I just may have that info. Will get back to you.
Have to dig in the "lesser used" section archive.
:-)
Chuck
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
chuck has it
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Well sorry Guys, thought I did.
I only have the paper on the parts listing and not the Owners Instructions
for the Home recording option, HR-1. Ask in the general section here on The Phorum.
Still, someone may have this info. And, if so, I will contact them and add it to my archive if it pops up.
:-)
Chuck
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Thanks for looking Chuck, I guess that is a rare item.
Joe
Joe Bratcher near Louisville, KY
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
WOOHOO I have something RARE
is it worth a lot
41-608 BOL
1) installing instructions
2) installing and operating
3) instruction for operating
ahh I`ll never be rich any way
chuck I`ll resend them
joe send me your email or you can order them from chuck
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Way to go Sam, you are o k don't care what they say. Let me know what I owe you.
My email is w4rtc@yahoo.com
Thanks
Joe
Joe Bratcher near Louisville, KY
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
joe
check your email
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Hey Hey Sam, thanks for this info it is just what I wanted. . Mark up another one for the Phorum
Thanks a lot.
Joe
Joe Bratcher near Louisville, KY
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Hey joe
Did you try to make a recording ?
Sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
HI Sam
No I have to get the recording head rebuilt I used the info you sent to set up the feed gear. I am not sure when I can get the funds to get the head rebuilt. It is expensive. Many thanks for the info.
Joe
Joe Bratcher near Louisville, KY
Posts: 110
Threads: 26
Joined: Nov 2005
City: Wilmington
State, Province, Country: NC
(04-10-2016, 05:26 PM)sam Wrote: WOOHOO I have something RARE
is it worth a lot
41-608 BOL
1) installing instructions
2) installing and operating
3) instruction for operating
ahh I`ll never be rich any way
chuck I`ll resend them
joe send me your email or you can order them from chuck
sam
I too would like a copy of the Recording instructions. If still available
Bob T
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
hey bob
sent to your email will be from mafiamen2
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 110
Threads: 26
Joined: Nov 2005
City: Wilmington
State, Province, Country: NC
(06-23-2016, 01:38 PM)sam Wrote: hey bob
sent to your email will be from mafiamen2
Thanks Sam
Got all of it. Appreciate the help
Bob T
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
American Bosch Model 802 auto radio
|
Hello again;
I found a model 838 car radio on Nostalgia Air under United American Bosch, http://www.nostalgiaair.org/...Arran — 09:32 PM |
New Philco Repair Bench
|
Morzh is correct. The repair bench on our website is an archived image of chuck’s original site. He no longer provides s...klondike98 — 05:32 PM |
Made mistake & did not label connection
|
Excellent information. It is all starting to come together now and your explanation really helped since I noticed that ...georgetownjohn — 04:39 PM |
Made mistake & did not label connection
|
Hi John,
I don't have this radio, but I can supply some info:
Based on your pic, pins 7,8 and 1 are used together, go...MrFixr55 — 02:02 PM |
New Philco Repair Bench
|
As far as I know, the Repairbench does not work, and has not been working in a while.
Chuck (we had that campaign looki...morzh — 01:33 PM |
Radio city products 664 schematic request
|
Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM |
New Philco Repair Bench
|
Thanks Gary.dconant — 12:16 PM |
New Philco Repair Bench
|
I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM |
New Philco Repair Bench
|
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM |
Made mistake & did not label connection
|
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires.
Why'n't you...morzh — 09:49 PM |
Who's Online
|
There are currently no members online. |
|
|