Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

ID of Philco's
#1

All, Here are 3 pictures of some Philco radios. I cannot find a model number on any. Can someone please ID ?

Thanks

Skip...

[Image: http://i292.photobucket.com/albums/mm38/...bhzoyl.jpg]

[Image: http://i292.photobucket.com/albums/mm38/...snhlof.jpg]

[Image: http://i292.photobucket.com/albums/mm38/...lc6f1i.jpg]

Found at antique store..
#2

Alll 3 are post war sets. 46-1201, or so, 47-1230, and a 46-350. You can find them here  http://philcoradio.com/gallery/#list

Terry
#3

Terry, Ok thanks.. the one looked closer to a 46-1209 ..
instead of a 47-1230..


Skip...
#4

 The first set could also be a 48-1201, which was the same set but with some miniature tubes, and slug tuned IF cans, I believe that the B+ voltage was higher as well.

http://www.philcoradio.com/gallery/1948a.htm#w

 The console is a 46-1209 and the last set is a 46-350, unless it has an imitation alligator covering then it would be a 48-360.
Regards
Arran
#5

All, Ok thanks.. Just a quick Question.. What are these worth.. Consider them Not working..

So I know what to offer..

Skip...
#6

All, Ok picked up all three radios for 25.00 each.. Cabinets are not in great shape. But radio itself looks OK.. Will not know until I start to pull apart.. Parts are probably worth what I paid..

Thanks
to ALL

Skip...




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4234 online users. [Complete List]
» 1 Member(s) | 4233 Guest(s)
Avatar

>